10km SMF DOM 25G SFP28 Transceiver CWDM 1270nm Brocade Compatible

10km SMF DOM 25G SFP28 Transceiver CWDM 1270nm Brocade Compatible

Brocade Compatible 25G CWDM SFP28 1270nm 10km SMF Optical Transceiver Module DOM

Product Features
● Supports up to 25.78Gb/s bit rates
● compliant to IEEE 802.3cc
● compliant to SFF-8402 for SFP28 solution
● Digital Diagnostic Monitor Interface with SFF-8472
● Hot pluggable SFP+ footprint
● 1271nm ,1291nm,1311nm,1331nm ,1351nm,1371nm CWDM transmitter
● Applicable for 10Km SMF connection
● High transmission margin
● Low power consumption<1.5W
● Single 3.3V power supply
● Operating case temperature:
Commerical:0 to 70 °C Exceptional:-20 to 80 °C

Applications
● 25.78 Gb/s single lane
● Other optical links

Product Descriptions
Olinkcom’s OLSCXX2XL-CD10, 1271nm ,1291nm,1311nm,1331nm,1351nm,1371nm CWDM DFB transceiver is designed for use in
25Gb/s data rateover single-mode fiber for link length 10Km.

The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s

single lane optical links.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(E) =-20 to 80℃,VCC = 3.13 to 3.47 V)

Notes:
1. Average power figures are informative only, per IEEE 802.3cc..
2. Measured at the BER less than 5E^-5, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 25.78Gb/s.

This SFP28 25G provides 25GBase-CWDM throughput up to 10km over single mode fiber (SMF) using a wavelength of 1270nm
through an LC duplex connector. It provides 25GBASE Ethernet connectivity option for 25G Ethernet, telecom and data center.
It is fully compliant with the SFP28 MSA, CPRI and eCPRI standard.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.