100GBASE-SR4 100G QSFP28 Transceiver 850nm 100m DOM MTP MPO MMF

100GBASE-SR4 100G QSFP28 Transceiver 850nm 100m DOM MTP MPO MMF

JNP-QSFP-100G-SR4 Juniper Compatible 100GBASE-SR4 QSFP28 850nm 100m DOM MTP/MPO MMF Optical Transceiver Module

Product Description

Olinkcom's OLSQ85TXM-CDS1 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ SR4 for 100 or 40 Gigabit Ethernet , Infiniband FDR/EDR Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Gigalight Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service

Optical Characteristics (Top=0~70℃, Vcc=3.14~3.47V)

Product Features

● MTP/MP0 optical connector

● Single +3.3V power supply

● Hot-pluggable QSFP28 MSA form factor

● Up to 100m OM4 MMF Distance

● 4x28G Electrical Serial Interface (CEI-28G-VSR)

● AC coupling of CML signals

● Low power dissipation(Max:3.5W)

● Built in digital diagnostic function

● Operating case temperature range:0℃ to 70℃

● Compliant with 100GBASE-SR4

● I2C Communication Interface

Applications

● 100GBASE-SR4

● Infiniband QDR/DDR/SDR

● 100G Datacom connections

Ordering Information

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.