Automatic Waste Tyre Strip Block Cutting Machine For Tyres Chip

Automatic Waste Tyre Strip Block Cutting Machine For Tyres Chip

First Introduction

Application:

To cut tire from tire cutter into 50*50mm pieces.

Main technical spc.:

Features:

1.Turn on the power, first start the main motor, wait for the motor to run normally, prepare to feed.

2.The radius of the tire cut through the tire dismantling machine is placed on the rotating pallet by an operator,the tray is controlled by the worker and the button controls the hydraulic cylinder lift,The cutter will feed automatically and cut to 35mm block. cyclic cutting operation until the ring,after cutting to the mouth ring, the button is returned to the hydraulic cylinder to take down the ring and continue to be placed in the radius tire cut by the tire dismantling machine.

Attention:

1. Before starting the machine, check if the tool, gear, and bolt are loose and wear out. after confirming there is no problem, close the cover.

2. The width of the block is kept 50mm-90mm.

3. Regularly add lubricant and change.

4.Note that the tool should be repaired in time if it is damaged after use for a period of time to avoid danger.

Qingdao Honghesheng Industry Co., LTD, manufacturer of rubber machine,which is located in the west coast of Qingdao economic district, with 10 million registered capital. The company covers an area of 5000 square meters with 26 professional and technical staffs and 5 senior engineers. The technical staffs have working experience in large tire enterprise who can design more suitable equipment for the customer as for tire production process. Also they can provide new factory site planning and other services.
The company’s main products are: Rubber kneader, rubber mixing mill, rubber sheet cooling machine, inner tube production line,tyre production line, vulcanizing press, waste tyre recycling plant…