Stainless Steel Vertical Pressure Steam Autoclave Sterilizer For Lab

Vertical Pressure Steam Autoclave Sterilizer For Lab

1.Sterilization Work Process Description
1.1 Preparation
1)Open the lid of the container, take out the drums and add water manually till it reach the high level. (Use distilled water)
2) Turn on the power and turn on the power break switch.
3) Standby indicator light is on. The high water level indicator lights up.
4) After piling the items, place them on a sieve plate sequentially, and leave some appropriate gaps between the packages. We suggest to make the packages into 20cm x 20cm x 10cm. The dressing and the textile should not be tightly packed. And don’t forget to place the sterilizing indicator.
5) After placing the drum in the container, close the and clockwisely tighten the hand wheel till the lid is closed. Don’t close too tight as which might bring damage to the rubber gasket.
6) Set sterilization parameters (see parameter settings for details).

The Sterilizing time can be set by the followed table 2, please set the sterilizing time and temperature according to different item required.

CHARACTERISTICS

• Equipped with a pressure/temperature controller, the pressure setting range is 0.07 to 0.22MPa

(corresponding to a saturated steam temperature of 115 to 134°C).

• Equipped with a timer to automatically control the sterilization time.
• Equipped with a safety valve, the relief valve would automatically releases the pressure when the

sterilization pressure exceeds the maximum allowable value.

• The immersed type electric heating tube, which is with anti-dry function. When the water level is

lower than the specified water level line, the sterilizer automatically cuts off the heating power and alarms at the same time.

Parameters

Guangzhou Cleanroom Constuction Co., Ltd. was established in 2010 and is a high-quality enterprise in China's cleanroom system engineering and equipment manufacturing. The company has been recognized as a high-tech enterprise and a "little giant" of technological innovation in Guangzhou. Our production base is located in Panyu, Guangzhou, and our sales center is situated in Pazhou, Guangzhou. We sincerely welcome customers to visit us.

The company has obtained ISO 9001, ISO 14001, and ISO 45001 certification and holds multiple utility model patents and design patents. We are members of various professional associations, including the Guangdong Laboratory Association, Shanghai Laboratory Equipment Association, and Guangdong Medical Equipment Association, and we actively participate in renowned industry exhibitions such as the National Hospital Construction Conference, the Munich Shanghai Analysis & Biochemistry Exhibition, and the National Pharmaceutical Machinery Expo.

We focus on providing comprehensive solutions for laboratory and medical cleanroom construction. Our products include air showers, pass box, workbenches, dissection tables, fume hoods, and more, widely used in fields such as animal experiments, biosafety, food safety, chemical industry, semiconductors, healthcare, and pharmaceuticals. Our clients include well-known institutions such as Nanshan Pharmaceutical, Sun Yat-sen University, Tsinghua University, Hong Kong University of Science and Technology, Guangdong Medical Device Quality Supervision and Inspection Institute, and Shenzhen CDC.

GCC is committed to becoming your All-in-one Cleanroom Construction and solutions Partner.