Temporary Outdoor Rack And Pinion 3 Tons Construction Elevators - SC300 KP-B15

Temporary Outdoor Rack and Pinion Construction Elevators - SC300 KP-B15

Features
Standardization and universalization of cages make them can be used as left or right cage freely.
The standardized and universal electrical cabinet, resistance box and base make them can be replaced wholly or individually, and their installation position can also be changed.
The electrical cabinet and/or resistance box of the same type hoists are interchangeable.
Made of Q355B steel.
The hot dip galvanised or dip painting finishing make the inner wall of pipes also be protected, greatly improve the corrosion resistance.
The center-setting rack and drive device is of large power transmission moment, good force balance on drive frame.
Apply helical gearbox with large bearing capacity, small tooth wear, impact resistance, of which service life is greatly improved (about 3 times more than worm worm reducer).
Guide rollers of KANGBO hoists are non-eccentric, there is no need to adjust the clearance of rollers after installation.

Technical Data

FAQ

What is the advantage of applying non-eccentric rollers on the rack and pinion construction elevators?

After the rack and pinion hoists are installed, the technicians must adjust the position of rollers to ensure the gaps between rollers and mast section pips are proper.

The rollers of lifts drive devices and hoist cars must be adjusted to be in place, and the gaps must be right, or, the elevators will shake or tremble when running.

And adjusting the rollers needs experiances and serious and careful attitude.

KANGBO Group finished this difficult jobs on its production line on behalf of KANGBO construction hoists users.

Apply non-eccentric rollers of elevator cars and drive devices mean the users don't need to adjust the rollers after installation.

Machine certified TUV according to European Regulation EN 12159:2012, EN 60204-1:2006/A1:2009.

Xiamen KANGBO Machinery Group Co., Ltd., has been specializing in manufacturing Construction Hoists and Hoist Spare Parts for more than 20 years.

Products: Construction Hoists and Spare Parts

Capacity: Annual sales quantity is more than 3500 units Construction Hoist.

With experianced mechanical and electrical engineers, skillful technicians, and the most advanced equipments, it is the leading manufacturer of Construction Hoist and its Spare Parts in China.

Most of the welding of the construction lifts are finished by welding robots.
Parts of the construction elevators are finely processed by Computer Numerical Control machine tools.
Sand blasting and baking paint for finishing.

KANGBO produces its own patented helical gearbox and safety device and, has its own test centre for safety devices. There are test platforms for testing and improving all its vertical transportation equipment.
KANGBO construction lifts are TUV proved according to European Regulation EN 12159:2012, EN 60204-1:2006/A1:2009, and also obtained CCC certificate for domestic market.
The company has obtained ISO 9001:2000 international quality management system certifications.
The products have been supplied to domestic and overseas markets, and enjoy a prestigious reputation.

Products exported by: Xiamen Comwinning Import and Export Company, Ltd.