Weave Matte Finish 3K Twill Carbon Fiber Tube OD 6mm

Ideal Choice Extremely Lightweight Weave Pattern Matte Finish 3K Twill Carbon Fiber Tube

3K Twill Carbon Fiber Tube Description:

3K Twill Carbon Fiber Tube is at the forefront of lightweight and high-strength design. This tube's 3K twill weave pattern offers the perfect combination of lateral strength and crush resistance resulting in a tube that is both much stronger than steel, and much lighter than aluminum. Containing no metal means that it will not rust or corrode in wet or underwater environments. Having a matte finish provides an excellent surface for adhesives and paints. These features make it the perfect choice for mobile and outdoor mechanical frames, robotic apparatuses, RC aircraft spars, sports equipment, and telescoping poles. Carbon fiber is a great replacement for metal tubes and poles in most applications.

3K High-Performance carbon fibre tubes are our range of 3K Woven Finish tubes which have a stunning high-gloss / Matte woven carbon fibre finish to complement their incredible strength. With the classic appearance of 2/2 twill carbon fibre coupled with 100% roll-wrapped prepreg carbon fibre construction, these remarkable tubes look as good as they perform.

Different from Pultruded carbon fiber tubes, a roll-wrapped tube is lighter in weight, stiffer, and stronger. It is widely used for many projects in sports, RC, robots, etc. by hobbyists for surface protection. 3K Carbon fiber tube with high strength, stiffness, excellent load-bearing performance.

3K Twill Carbon Fiber Tube Features:

• Can be cut to length with an abrasive chop saw. Manufactured with a 3K twill weave which is the optimum weave for carbon fiber tubing to maximize strength and formability. The matte finish is great for surface coating and adhesive bonding applications.
• Extremely lightweight and high-strength composite alternative to aluminum or steel tubing with a much higher rigidity, which will minimize flexing under load and offer the stiffest structure possible. It is the ideal choice for your application.
• Carbon fiber composite tubing is used in various high-performance applications like RC aircraft, drones, helicopters and quadcopters, sports equipment, robotics, lightweight framing, and frames.
• It is incredibly lightweight, allowing it to be used in highly portable applications where weight is a premium. Corrosion, water, heat, and fatigue resistance that is great for outdoor applications and wet environments. Clean cuts with an abrasive saw.

3K Twill Carbon Fiber Tube Specifications:

Applications:

1). Frames of Drones/ RC Models

2). Sports Equipment

3). Industry/ Reinforcement of Construction

4). Medical External Fixation Scaffolds

5). Kites

6). Diving/ Sailing

7). Robotics

8). lamp brackets

9). PC equipment spindles

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.