25 Shore Resin Castings RTV2 Silicone Mold Rubber Easy Demold Good Flowability

Capture Fine Details Easy Demold Good Flowability RTV-2 Silicone Liquid Rubber For Resin Castings

Liquid Silicone Rubber for Soap Mold Making is a two-component material, which consists of Part A base silicone and Part B CA30 curing agent; then the silicone base and curing agent can cure at room temperature by a condensation reaction.

These materials can be cast into the cured silicone mold: plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc

1. Good flow ability and long working time

2. Medium hardness

3. High tear and tensile strength

4. Easy de-mould from complex replica parts

5. Acid and alkali-resistance

Technical parameter of silicone rubber for candles moulds

Step One : Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two : Vacuum pumping . Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated .

Step Three: Pouring the vacuumed silicone mixture into the frame with original concrete mold .

The Silicone Rubber for Candle Mold Making is stored at or below 30 °C(85 °F) in the original unopened containers .

After 12 months,please use a stirring mill to stir the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

12 months from date of production when stored at 25°C in the original sealed packages.

1. Packed with vacuumed thick PE bag inside, and iron barrel (tin) outside,packing in 5kg,20kg,25kg,200kg.

2. The product should be stored in a cool dry place, avoid the sun and rain,it must be kept away from acids, alkalis, salts and other compound.

Benefits of MC Silicone

Ease of processing
High resin resistance increasing the number of cast parts
Low linear shrinkage for greater accuracy
Easy release of shapes, including large pieces and complex geometries
High compatibility with water-rich casting materials such as gypsum
Increased compatibility with high performance concrete
Dimensional stability due to very low shrinkage
High mechanical properties over a range of flexibility

Mingcheng Group Limited was established in 2010 based in Dongguan,China, with brand MC Silicone for overseas market, dedicated to manufacturing and R&D of mold making and casting materials.

Our professional approach to all our work, together with creative ideas and strong technical skills, enable us to produce high quality, cost effective materials. We pride ourselves on the different types of mould making materials we offer.

Why Choose Us?

Our Advantages
More than 20 years experience in moldmaking & casting industry
10 years exporting experience

Benefits of MC Silicone
1- A Technology Team: R&D Support
2- A Factory: customize for you in every possible aspect
3- A Sales Team: assist you develop more markets
4- Fast Delivery time about 3-5 working days per order
5- Professional Sales Service, 12-24 hours response
6- Various Payment Method

If you're looking for a good silicone supplier, you've come to the right place. Our unique vision and mission drives us bring the best products and service to each of our clients. We gonna be your guide in silicone industry, we are your partner. Welcome to Join us.