K4007 M1156 CA40 RCA40 DD MM T Series 1-1/2'' Inch FKM Diaphragm

K4007 M1156 CA40 RCA40 DD MM T Series 1-1/2'' Inch FKM Diaphragm

The diaphragm in the valve divides the electromagnetic pulse valve into two chambers, the front and the back. When the compressed air is connected and enters the back chamber through the throttle hole, the pressure of the back chamber will press the diaphragm against the output port of the valve, and the electromagnetic pulse valve is in the "closed" state. The electric signal of the pulse injection controller makes the armature of the electromagnetic pulse valve move, the vent hole of the rear air chamber opens, the rear air chamber grabs quickly, the diaphragm moves backward, the compressed air is injected through the output port of the valve, and the pulse valve is in "open" state. The compressed air is ejected from the valve in an instant to form a jet air flow.

Goyen Type Diaphragm Repair Kit:

Deference number:

Dimension Diagram:

Diaphragm Features:
1. Diaphragm (Rubber or Fabric Reinforcement in Rubber Diaphragms) is a precision functional part used check pressure or change fluid pressure into drive power.
2. Fabric-reinforced in rubber diaphragms utilize a layer of an engineered fabric material as part of the diaphragm comstruction. This layer of fabric give tremendous design flexibity.
3. Fabric is made of polyester, nylon and silk and commonly used for most applications, such like exposed to high-temperature, or require extremely high-strength.
4. Facbric-reinforced diaphragms advantages:
*No leakage
*No Lubrication
* No Breakaway Force
* No Friction
* Functionality Over Wide Pressure Ranges
* High Strength
* Low Cost
* Simple Design
* Versatility
5. EPDM, FKM all available.

Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on