16kg/Cm2 Rotary Magnetic Chuck For High Precision Grinding

XH42 rotary permanent magnetic chuck

Table maximum suction 13-16kg / cm ², is about 2 times the ordinary magnetic sucker to ensure that the workpiece fixture will not be a clear shift, due to the processing process does not require power supply, so this product does not exist thermal deformation, effectively guarantee The processing accuracy.

Specification sheet

USAGE METHOD

1. Wipe the bottom surface of the suction cup and gently place it on the workbench of the machine tool withthe nameplate facing out, and then fasten the base with the bolt pressing plate

2. Check or repair the parallelism of the working face of the suction cup to the working surface of themachine tool

3. Place the workpiece on the working surface of the suction cup, and then insert the wrench into the shaft hole and turn it 180 degrees clockwise to align the red mark with "on" to suck the workpiece for processing.4. After the workpiece iS processed, insert the wrench into the shaft hole and turn it 180 degrees anti clock wise to align the red mark with "off' to remove the workpiece.

MATTERS NEEDING ATTENTION

1. It is strictly prohibited to knock and scratch, and the surface shall be cleaned before use to avoid affecting the accuracy.

2. Use ambient temperature -40 'C ~ 50 'C to prevent magnetic force reduction

3. After use, the working surface shall be coated with antirust oil to prevent rust.

4. Please pay attention to the safety when processing, pay attention to the speed and the cutting amount(grinding amount) when processing hard materials, so as to prevent the workpiece from flying out.

FAQ

Q: Are you manufactory or trade company.

A: We are both factory and trade company, we have lots of Cooperation factory with different quality and prices, just tell us your need, there is always a product suitable for you.

Q: Where do you located:

A: JYC technology Co.,Ltd. located at Wuxi City, Jiangsu Province, 1 hour by fast rail way to Shanghai City.

Q: Production time:
A: Normally,We'll have regular items in stock, customized products will take 7-14 work days.

Q: Payment term:

A: TT, credit card, L/C, Western Union, Paypal and so on, we accept all kinds of payment.

Q: What's your work time:

A: Normally, our work time is 9: 00 AM to 17: 00 PM Beijing time, but if you have emergency, Please contact us freely at any time. Our salesman will sulove your problem as soon as possible.

As a professional designer and manufacturer of magnetic products over 10 years, JYC technology Co.,ltd is always providing customers appro-priate solutions to holding and lifting materialduring machining progressing.

The huge range of our magnetic products includeElectro magnetic chuck(EMC) series, Permanentmagnetic chuck(PMC) series, Electro permanentmagnetic chuck(EPMC) series, Electro magneticlifter (EML),.Permanent magnetic lifter(PM-L),Electro permanent magnetic lifter (EPML),Iron remover, Demagnetizer, etc.

Magnet is widely used in industries like metallurgy, machinery, shipbuilding, electric power, mine, automobile manufacturing, rail transportation and so on.

There is mainly 3 kinds of magnet, permanent magnet, electromagnet, permanent electromagnet. different magnet is suitable for different areas, and as a professional supplier of magnetic tools, JYC technology is is always providing customers appropriate solutions for our customers.