4V330C-10 3/8'' Double Solenoid 5/3 Way Close Center Pneumatic Solenoid Valve

4V330C-10 3/8'' Double Solenoid 5/3 Way Close Center Pneumatic Solenoid Valve

AirTAC Type 4V330C-10 pneumatic solenoid valve is a 5/3 pneumatic valve with five ports, three positions and two solenoid coils. It is electrically controlled and is usually used to control a cylinder.

The 4V300 series has the following three types:
4V310-10 is a 5/2 pneumatic valve with 1 solenoid coil;
4V320-10 is a 5/2 pneumatic valve with 2 solenoid coils;
4V330-10 is a 5/3 pneumatic valve with 2 solenoid coils.

Installation instructions of 5/3-way pneumatic solenoid valve:
1. Before installation, please ensure that the valve is not damaged due to transportation.
2. It is recommended to use a medium lubricated by a 40 m filter element. Note flow direction and port size.
3. Please pay attention to whether the installation conditions meet the technical requirements (such as "voltage", "starting frequency", "working pressure" and "operating temperature range") before installing and using the equipment.
4. Pay attention to the direction of air flow during installation. P is the inlet, A (B) is the working outlet and R (S) is the exhaust outlet.
5. Take steps to avoid vibration and freezing.
6. Make sure the fittings and pipes are clean before using them. When connecting to fittings, make sure that the PTFE thread sealing tape is used correctly.
7. To prevent dust from entering, use a muffler at the exhaust. When disassembling, do not forget to install dust cover at inlet and outlet.
8. After installation, please test the valve by manually operating the valve first.

Technical Data:

Dimension Diagram:

4V320(Grommet)

4V320(Terminal)

Brando Supply:
1.Solenoid Valve:
Pulse Jet Valve: Goyen Type Pulse Jet Valve, SBFEC Type Pulse Jet Valve, ASCO Type Pulse Jet Valve , Turbo Type Pulse Jet Valve.
Direct Acting Solenoid Valve:Brass Solenoid Valve, Stainless Steel Solenoid Valve, Plastic Solenoid Valve and etc.
Refrigeration Solenoid Valve:Castel Type Solenoid Valve, Danfoss Type Solenoid Valve.

2.Repair Kit:Solenoid Coil, Solenoid Armature/Stem, Diaphragm Repair Kit and etc.

Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on