4V210-08 Airtac Type Single Solenoid Pneumatic Air Control Valve

4V210-08 Airtac Type Single Solenoid Pneumatic Air Control Valve

Pneumatic solenoid valve takes an electrical signal (ac or dc Voltage) and opens or closes the air supply going to your pneumatic actuator. Very basic solenoids consist of an electromagnetic coil, a plunger or piston, a piston return spring, and a valve body. When you apply electrical power to the coil, it attracts the piston and causes it to move inside the valve body. This, in turn, opens or closes ports inside the valve body allowing your air supply to operate the pneumatic actuator. When the electric supply is removed, the piston spring returns the piston to its original position and shuts off the air supply to the pneumatic actuator.

To Connect a DIN Coil:

Remove the screw from the plastic housting & unplug from the DIN coil.
Use the removed screw to push the terminal block out of the plastic DIN housing.
Note the "1", "2", and ground "⏚" symbols.
For DC DIN Coils, connect "1" to your positive lead and "2" to your negative lead.
For AC DIN Coils, connect "1" to your HOT lead, "2" to your NEUTRAL lead, and "⏚" to your ground lead, if required.

Data of 4V200 Series Pneumatic Solenoid Valves:

Dimension of 4V210-08 Pneumatic Solenoid Valve:

Video of 4V210-08 Pneumatic Solenoid Valve:

Production Video of Pneumatic Solenoid Valve:

More Pneumatic Products for you to choose:

Solenoid Operator Manifold Silencer Pneumatic Hose Fittings

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on