House Decorative Cornices Bracket Crown Exterior Wall Panel

House Decorative Cornices Bracket Crown Exterior Wall Panel Corner Shape Color Photo Frames Mdf Moulding

Product Info

1) Species: Radiata Pine / Chinese Fir / LVL(Eucalyptus)

2) Moisture content: 10-12% The raw material prior to manufacture should be kiln dried to within the 10-12% moisture content range To ensure stability through the successive manufacturing processes.

3) Specification: Accept customized size and profiles Finger jointing is a popular process used for producing wood moldings, using mechanical (and/or automated)equipment to produce long length mouldings and have all the defects removed.

4) Surface finish: Raw wood moulding profile + Thin gesso coat + water base primer (can be water proof) Coating application would be applied equally on all edges and has a strong adhesion to the Wood substrate throug testing. No visible defects like patching, open finger joints, bleed through, etc After being coated / primed. Mouldings would stay straight and not have excessive bow or spring

Product Feature

1). Moulding preparation The wood blanks are maufactured in mouling profiles.

2). Surface sand following moulding preparation, Machined(produced) with high speed

planing equipment To yield a premium finish timber moulding ready for priming with a gesso coating.

3). Priming-stage 1: Mouldings are spray-coated with the 1st application of thin gesso coating.

4). Intermediate sanding stage: Surface sand following priming stage 1

5). Mouldings are spray-coated with the 2st(and final) application of water base primer.

6). Final product check with light sand and buff to the surface, that is readily painted

with quality topcoats