ISO9001 Lightweight White 0.8 MgO Mullite Insulating Brick

ISO9001 Lightweight White 0.8 MgO Mullite Insulating Brick

Insulating Mullite Brick Brick for special ceramic sintering furnace lining, mainly based on aluminum silicate-based refractory materials, with some excellent performance, (especially high temperature creep performance) living in natural raw materials production Of the high aluminum products first.

Insulating Mullite Brick Brick for special ceramic sintering furnace lining,Mullite composition AL203 in about 79%, Si02 in 21% is more appropriate, but there are a certain amount of raw materials in the impurity composition, at high temperatures will cause the composition of the composition, so as the impurity composition increases, will make vitreous and corundum And the molybdenum is formed into coarse grain structure, which makes the porosity of the product increase, the thermal shock stability and corrosion resistance are reduced, and cracks are likely to occur.

Insulating Mullite Brick Brick for special ceramic sintering furnace lining ccording to the different use of temperature production of multiple grades of mullite lightweight insulation brick is divided into WAM23 / WAM26 / WAM28, the use of temperature range from 1100C-1650C, the ratio of each product is specially designed to meet the different thermal and Physical requirements.

Performances:

1. Low heat conductivity, with good thermal insulation effect

2. Low hot melting, due to low heat conductivity, it accumulates little heat to get obvious energy-saving in intermittent operation.

3. Low impurity content and low content of iron oxide & alkali metal oxide realize high refractoriness. High Al2O3 content makes it keep good performance under reducing atmosphere.

4. High thermal compressive strength

5. Accurate size increases construction speed, decreases fire clay usage, ensures strength and stability of masonry, prolongs the life span of lining.

6. It can be processed into special shapes to reduce brickwork amount and paving seam.

Applications:

Generally suitable for thermal surface refractory lining or other refractory back lining insulation layer.

Refractory lining or thermal insulation for industrial furnaces in petroleum or chemical industries, such as ethylene cracking furnaces, tubular furnaces, reforming furnaces for synthetic ammonia, gas generators and high temperature shuttle kilns.

Tunnel kiln, push board kiln, roller kiln, wood kiln refractory lining material for industrial and household ceramics.

    Zhengzhou ANNEC Industrial CO., Ltd. was founded at Sep, 2003, and has been a NASDAQ listed corporation since 2011(Stock code: ANNC). ANNEC had become refractory industrial leader provide core service such as refractory production, technology of blast furnace and hot blast stove and EPC contract project in China. Now ANNEC sets up Academician workstations, the Provincial Engineering and Technology Center, Hot Blast Stove Research Centre, ANNEC (Beijing) Engineering Technology Co., Ltd and four production sites as subsidiaries. Yearly refractory output is 150 kt.

    ANNEC is a national hi-tech company, and is accredited with ISO9001:2008 quality control system standards, ISO12001:2004 environmental control system standards, and GB/T28001-2011 HAZOPS. ANNEC has set up a thorough and effective management system with practical considerations for her employees and community, and is persistent in promoting employee self-value and product products. Based on the efforts, ANNEC is the recipient of the prestigious 2012 Zhengzhou Mayor Quality Prize.

ANNEC has capability of manufacturing refractories materials of fireclay, high alumina, silica and insulating bricks and corresponding unshaped refractories for hot blast stove. Meanwhile, ANNEC also produce various refractories for coking, sintering, casting house, torpedoes, iron ladles and steel ladles. ANNEC’s products have been sold to America, Japan, Korea, India, Iran, Vietnam, Turkey, Malaysia and Indonesia; get the customer's endorsement in the domestic and world. At the same time, ANNEC’s testing center shoulder examinations of products quality and tests of new product development.

    ANNEC has been providing matched refractories of different type HBS for CERI, CISDI, WISDRI, CSGI and Kalugin，P•W，Danieli and SIEMENS VAI in their worldwide projects. ANNEC is awarded as excellent supplier by Baosteel, CSGI, and MCC etc.

ANNEC owns more than 50 patent technologies which include checker bricks with19 holes; 37 holes, 61 holes, ceramic burner of swirl-cutting top combustion hot blast stove, cone-column composited ceramic burner for top combustion hot blast stove, symmetric layout structure of hot blast stove, three section hot blast stove with independent structural. ANNEC was authorized to fulfill editing 7 standards of national and of industrial, including 《Silica Brick》, 《High Alumina Brick》， 《Refractory Brick for HBS Ceramic Burner》,《Refractory Standard Configuration of HBS System 》 and 《Energy Saving Technical Specification of Top Combustion HBS》.

    ANNEC successively get awards such as “Chinese Outstanding S&T Innovation Enterprise”、“AAA grade Credit Enterprise”“Chinese Famous Brand Trademark China” “Provincial Famous-brand Product, Henan”“Provincial Credit Enterprise, Henan” “Zhengzhou Environmental Enterprise”

    ANNEC owns core culture which is to make customer satisfaction, staff satisfaction and shareholder satisfaction; and continuously push forward technological development of HBS and progress of refractory technology by its great efforts, and gradually becomes one of the best professional suppliers in high temperature industry of global