400mm Belt 395nm UV Conveyor On All Sides

UV Conveyor On All Sides

Machine installation

1. After the machine is unpacked, everything can be done.

2. The four sides of the machine should reserve the space required for each line of operation.

3. Rotate the machine foot screw until the four casters are off the ground, and the four adjusting

foot cups are flat and stable on the ground.

4. The power supply can be connected after the machine is installed.After the power is connected,

you can start the machine. Generally, the factory machinery has been adjusted to the best working

state before leaving the factory. If there is no special reason, do not move the machinery. Especially

the conveyor belt adjusts the balance handwheel, don’t move it randomly

Main operating instructions

1. Turn on the power, open the control door, turn on the power, and air switch.

2. Turn the main power switch to gear 1, unscrew the temperature control switch, the transportation

switch, turn on the switch on the governor, and turn on theThe transportation speed of the conveyor

belt is adjusted to meet the requirements.

3. Press the lamp 1 on button, UV lamp 1 is on, and there is an indication on the ammeter; press the

lamp 2 on button again, lamp 2 is on,The flow table 2 has instructions.

4. The temperature indicated by the thermometer starts to work. When the temperature rises to 40~50℃,

please turn on the fan switch immediately, otherwise the lamp life will be shortened. If the temperature

exceeds the temperature required by the product, turn off the UV lamp and let the fan reduce the

temperature to avoid unnecessary losses to the product.

Maintenance and precautions

1. The outside of the machine should be kept clean and dry, and there should be no water on the ground.

2. The mechanical drive shafts, bearings and chains should be greased regularly.

3. If you find any debris on the lamp, do not scrub it with your hands directly. Use a handkerchief or a

clean cloth to wipe it with alcohol to make the lamp work in the best condition.

4. Don't turn on the side of the UV machine after it is turned on. UV light will damage human skin and eyes.

5. Do not open the control door after turning on. It is strictly forbidden to wipe or touch the electrical

appliances inside with your hands or other objects (after shutting down, you can't wipe or touch the

electrical appliances inside with your hands or other objects, because there is high current and high

voltage .), so as to avoid human body electric shock accidents.

6. Blow off the dust on electrical parts regularly.

7. Other specifications can be ordered

DONGGUANG YIJIANG Photoelectricity Technology Co., Ltd. was established in 2016. The chief engineer and technical backbone of the company have 8-13 years of industry experience, and have made certain achievements in the semiconductor, aerospace, electronics and other industries. The company has served more than 12,800 companies since its establishment. +, The main equipment at this stage are: UV LED curing machine (system), UV ultraviolet curing machine, infrared (IR) tunnel oven, spraying equipment, industrial precision oven, vacuum oven, screen printing

machine, etc. Used in semiconductors, aerospace, new energy vehicle battery modules, new chemical composite materials, liquid crystals, mobile phone panel bonding, glue bonding, screen printing inks, precision electronics, optical communications, polymer chemical materials, medical industry, furniture wood, printing Inkjet, etc. In July 2019, the chief technical engineer of the company and the academician of the International

Optoelectronics Research Institute jointly developed a complete set of UV curing equipment suitable for semiconductor applications. Designed for reliability, designed for efficiency, and manufactured for durability, we are committed to developing more advanced UV curing systems, providing more cost-effective products, better technical guidance, and better after-sales service.