Anti Abrasive VFD Drilling Mud Decanter Centrifuge

High Speed Decanter Centrifuge Used In Solids Control Is Mainly To Process Particles Ranged 2~7 Microns.

Decanter Centrifuge is designed for the drilling mud solids control and oilfield waste management. Aipu VFD drive decanter centrifuge with variable speed allows drilling contractor or mud service company to do the barite recovery, fine/ ultra fine solids separation, dewatering centrifuge. Aipu has the decanter centrifuge from a 9-inch bowl to a 22-inch bowl available for different applications.GN decanter centrifuge bowl length and diameter ratio is over 3, this gives the best result for the drilling fluids cleaning.

Specification on APGLW355x1258

Decanter centrifuge information

Decanter centrifuges also referred to as decanting centrifuge or centrifuge decanter. In drilling mud process for oil & gas drilling there are middle-speed centrifuge and high-speed centrifuge. They can be designed as fixed frequency and variable frequency centrifuge.

Now in stock centrifuge high-speed one which model number is GLW355X1258 with 3200rpm speed and 35m³/h capacity. The bowl diameter is 355mm, while the length is 1258mm. The minimum separation point is 2 micron and its separation factor is 2035G

Centrifuge main motor is 30kw (40hp), the accessory motor is 7.5kw. This centrifuge in stock is a fixed frequency one. Upon clients’ demand, we can configure the VFD panel for it. Then the speed will be 0~3200rpm and VFD will lead to better protection on the motor as well as the whole centrifuge

Why select the Aipu decanter centrifuge?

All raw materials are of high quality. Such as the screw conveyor, bowl, the support frame, the surface paint, the motor, the control panel, etc.

Usually, finish one set centrifuge may take 30 days. But now, only in 1 week we’ll get all things cleared and make it arrive at the port. For other requirements or options, we’ll give you an optimal solution soonest.
Finally, our aftermarket will definitely satisfy you on soon response as 7×24 technique support. The centrifuge is rather mature to save more cost on wearing parts as well as maintenance

AIPU High-speed centrifuge spare parts

Main spare parts including the bearing, oil seal, the coupling, the cushion base, the fuse, etc. These are rather easy to get in the market and cost little.

Other application of APGLW 355 centrifuges

As we introduced before, the centrifuges can be used not only in the drilling fluids process. They can be used in many industries. Related to the oil and gas industry or the drilling industry, they can be used in slurry separation, the sludge treatment, waste management, and so on.

And in the drilling fluids system, they are used to recycle or reclaim the barite, too. When we use both middle-speed centrifuge and high-speed centrifuge, the high-speed one will be set behind the middle speed one.

Do you have any demand for centrifuges? No matter for solids control or for drilling waste management,or for the slurry separation and sludge treatment. Please feel free to contact us.

AIPU Solids control is professional manufacturer on solids control equipment and system. The solution for drilling mud process as well as the drilling waste management, and the oli sludge treatment system.

All items can be used in oil and gas drilling, the oil sludge treatment, the HDD mud recycling, the civil construction micro tunnelling, the piling and so on. The main equipment inlcuding solids control system, shale shaker, mud cleaner, centrifgue decanter, degassers, agitator, mud gun, centrifugal pumps, mud tank, cuttings dryer, the mud cooling system and so on.

Pleased to say AIPU products have been delivered to many regions and conturies around the world. Including Germany, Russia, USA, UK, Kuwait,  UAE, India, Indonesia, Malaysia, Singapore, Taiwan, and so on.

Our hot sales product Hunter series shale shaker is rather popular with all of our clients. The Hunter-MG and Hunter-D shale shakers can be configured as linear motion, BEM or the dual motion. For the decks, they can be double deck. For the base, they can be dual tandem or triple tandem

Another hot sales products Hunter seires mud cleaner is maintained all the good features of Hunter series shaker. And the hydrocylones are all made of high quality polyurethane. Another feature is the cones are interchangeable with famous brand ones.

Besides the shale shaker and mud cleaner, there are centrifugal pumps, mud agitators and so on equipment appreciated by our clients. New innovated mud cooling system for land oil drilling is a patented products used in SINOPEC drilling site. The performance surprised end users.

Why clients select AIPU?

It's because of high qualty and the reasonable cost happened during our cooperation. We are professional on solids control, mud process, sludge treatment. Among all the orders there are over 80% orders are repeat orders from our regular clients or recommned by them

Are you in the demand of solids control or other mud treatment-related items now? Please come to us freely. Trust you will be surprised by AIPU products and servcies. All the solutions will be optimal and soonest one.