High Frequency 35mm Aluminium Spacer Bar Insulating Glass Making

high frequency welding hollow glass aluminum spacer bar for insulating glass

The extruded sealant should have a smooth glass edge and no slippage.

Insulated glass ation, there are many sensors in the machine, it needs irrelevant

Preventing malfunctions by keeping people away from the machine

Threatens the safety of machines or individuals.
If it is necessary for a long time (5 minutes or more), it is necessary to open the timing sealant discharge function.

Extrude the sealant into a second glass to avoid mixer blocking
Carefully check the parameters and change the glass size parameters before extruding the sealant.

If you change the batch of glass, the thickness of the glass etc. will change in a timely manner.
If you use a different sealant, you will need to change the amount of sealant, as the viscosities can vary.
When starting work, you need to wait for the oil pressure to stabilize before starting extrusion.

The first glass sealant to prevent the sealant output from becoming unstable.

Product description and benefits:
1. Material: 3003 alloy aluminum
2.5.5mm side welding line, 100% bendable.
3. The wall thickness is within 0.30-0.35mm and the tolerance is ± 0.025mm.
4. Appearance: The surface is bright and smooth, and there is no knocking. The air holes are uniform and tidy.
5. It "conforms to the standard requirements for insulating glass"
6. Size: 5.5mm-35mm.

It must be cleaned before turning off the machine. Press the "Clean Start" button

Clean start. In the meantime, observe the purged sealant. If the sealant turns white, press

"Clean stop" to stop cleaning. You can then turn off the machine.

Automatic spacer bending machine is a special equipment for making aluminum frames of

insulating glass, which replaces the traditional fabrication technology. This equipment can

make a variety of convex polygonal aluminum frames by one aluminum strip in one time,

thus strengthening the strength of the aluminum frame, making the sealing effect of the

insulating glass more better.

•Siemens 1200 PLC control system with fast working speed
•4 groups of storages (2 or 12 groups of storages can be optional)
•Automatically cut and feed aluminum spacers
•Automatically avoid the pins while bending and cutting
Bend spacer frames continuously

aluminum spacer bending machine

Automatic spacer bending machine is a special equipment for making aluminum frames of insulating glass, which replaces the traditional fabrication technology. This equipment can make a variety of convex polygonal aluminum frames by one aluminum strip in one time, thus strengthening the strength of the aluminum frame, making the sealing effect of the insulating glass more better.