40khz 1650mm 1.8kW Immersible Ultrasonic Transducer

SUS316 made 40khz 1800W submersible transducer rod with generator for lab extract disperse stir

This ultrasonic tube cleaner has fixed diameter 57mm and length can be made of any size, ideal for any tube diameter over than 60mm.

Custom build ultrasonic frequency: 20khz, 28khz, 40khz, 68khz, 80khz, 120khz, 132khz, 200khz

Application and fileds

Immersible ultrasonic transducers are sealed stainless steel enclosures, to cleaning the interior side of the tube that is difficult to touch by hand;

Advantage of ultrasonic cleaner :

1. 304 stainless steel thickened 1.0MM, durable and solid; Easy to carry ;

2. Multiple frequencies for option for varies needs;

3. Varies application: Cleaning, emulsifying, separating, homogenizing, extracting, catalyzing, defoaming, stirring, etc.

Q: What is the temperature limit of skymen immersion transducers?

A: We recommend water temperatures of no more than 50 °C (125 °F). Higher temperatures can cause permanent damage.

Q: Can I use couplants other than water?

A: We warranty performance only with water couplant, the industry standard. While some customers have successfully used other fluids, the customer assumes all risk of potential damage to the epoxy lens. Note also that most alternate immersion couplants, like oil, oil emulsions, or alcohol, are significantly more attenuating than water and will affect transducer performance. They may also cause permanent damage to the lens with long-term exposure.

Q: How long can I submerge these transducers?

A: For the longest service life, we recommend that our immersion transducers be

time-cycled with an 8-hour submerged period followed by a 16-hour drying time. Since immersion transducers have epoxy wear surfaces or lenses, they can absorb water over time. This absorption can cause blistering on the front face, and this blistering can degrade performance and cause premature failure. Higher frequency transducers (10–20 MHz) have thinner epoxy layers and are more susceptible to damage from continuous immersion. Lower frequency probes have thicker wear surfaces, making them more robust.

✮ Skymen sets up branch in Hong Kong in 2009

✮ Mold injection department was established in 2013

✮ Skymen sets up independent marketing center in 2016

✮ Independent manufacturing center and R & D center was set up in 2017