Painting Q355B 4 Legs ASTM A36 Lattice Steel Towers

Lattice Steel tower for Power transmission ,Self-supporting Structure Tower

1. Production decription

A lattice tower or truss tower is a freestanding vertical framework tower. This construction is widely used in transmission towers carrying high voltage electric power lines. Its advantage is good shear strength at a much lower weight than a tower of solid construction would have as well as lower wind resistance. In structural engineering the term lattice tower is used for a freestanding structure, while a lattice mast is a guyed mast supported by guy lines.

Tower parameters :

Main legs: Chinese steel Q355B, which same to ASTM A572 GR50

Other members , bracing and not stress plate and angle steel: Chinese Q235B, which same to ASTM A36

Plates: Chinese steel Q355B, which same to ASTM A572 GR50

Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394

A) Dimension and tolerance for angle are according to GB/T1591-1994

B) Hot dip galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123

C) The welding will be performance in accordance with AWS D1.1 or CWB standard

ISO and SGS Certificate of transmission tower :

2. Product capacity

Qingdao Liangta Steel Structure Co.,Ltd is not a big factory ,But we manufacturer every tower by heard . .

​3. Technical support

Our engineer and drawer has lots of designing ,lofting experience of transmission tower.

4. Quality control

We have very strict quality control in every tranmsission towers .

Material incoming control:chemical and physical test

Zinc coating thinknes inspection

We usually has two ways of trial assembly for transmission power pylons : trial assembly before galvanzation

and after galvanization

6. Hot dip galvanization and painting

7. Package and delivery

Package we usually do as our clients requirment .Usually for angel steel tower ,we use plastic to package two ends .

8. Product catalogue:

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission line towers (the voltage up to 500kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers ‘requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 60,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• - Environmental Management System Certificate: ISO14001:2015
• - Quality Management Systems Certificate: ISO9001:2015
• - Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

Welcome to contact us ,we make sure your every question will be answered in time .