ID Card DC Motor SUS304 Waist Height Turnstile

ID Card DC Motor SUS304 Stainless Steel Waist Height Turnstile

Introduction:

Our swing barrier is designed to control pedestrian entering or exiting restricted areas, use SS304 stainless steel for the whole case, and adopt anti-damp, dust-proofing, water-proofing international standard design, suitable for both indoors and outdoors. To be the best choice for the places like park, station, exhibition hall, gymnasium and so on, can fulfill the functions like entrance control, time attendance, pedestrian volume control and fare collection function etc.

Functions:

1. The system has anti-collision function. When a foreign object hits the gate in an unauthorized state, the movement angle of the gate reaches the value set by the menu (such as 2°), the controller will activate the brake mechanism, prevent the gate from moving, and start. Audible alarm. When the external force is further increased, the brake controller will protect the gate from being broken. After the external force is removed, the gate is automatically reset and the system is normal;
2. With fault alarm prompt function;
3. Based on RS485 communication between the two drives, real-time interactive information and data between each other. It is a high-performance and high-reliability fieldbus. Its support for distributed control or real-time control provides an effective guarantee for communication between drives, ensuring the synchronization and state of the gates.
4. The servo motor drive mode is full-closed control. The high-stability encoder is used as the position loop input unit, and the superior proportional-integral differential algorithm is used to ensure accurate position, fast response, stable operation and no jitter delay during the operation of the gate. And other phenomena; the motor runs without squeaking, the operation is smooth and unobstructed, the torque is suitable, and the service life is long;
5. Multiple anti-pinch protection function, when the gate swing gate is blocked and the actual running current is greater than the anti-pinch protection current, the physical anti-pinch protection function will be triggered. In addition to the infrared anti-pinch protection function, multiple protection functions greatly reduce the occurrence of accidental injury;
6. With automatic reset function, if the pedestrian reads the valid card, if the system does not pass within the specified time, the system will automatically cancel the pedestrian access right;
7. Unified standard external electrical interface, which can be connected with a variety of card readers, and can be remotely controlled and managed through a management computer;
The entire system runs smoothly and with low noise

Features:
1. Within direction indicator to show the current status of the passage to pedestrians, guide pedestrians to pass correctly and quickly
2. Within automatic power-off function when the system is powered off, the access gate is opened to form a barrier-free access
3. Using several pairs of infrared sensors to prevent pedestrians from illegally entering the passage, protecting pedestrians from passing the passage smoothly and preventing trailing functions.
4. Within automatic reset function, after reading the card, if the pedestrian does not pass within the time specified by the system, the system automatically cancels the permission of this pass, and the reset time value can be set online.
5. There is a LED indicator light on the cover of the box. When the valid card is swiped, there will be a green arrow to indicate the direction of passing;
6. Can be used in the same system with other styles of access gates.
7. It has the function of fault self-check and alarm prompt, which greatly facilitates maintenance and use. 8. It has a unified and standard external electrical interface, which can be connected with other reading and writing devices for easy integration, and remote control and management can be achieved through a management computer.
9. It can be expanded into an automatic identification system to realize functions such as access control, attendance, and charges.
10. Can be used with other types of channel products.

FAQ:

1. Housing Type: Left, Middle,Right

Please be noted there are left, middle and right swing barrier housing. The configures and prices

Are different. When placing order, please indicate clearly how many pcs of each you need or

Please give us a sketch of your projects, we will give you advice.

2. Housing Materials and comparisons.

We provide 304 and 316 stainless steel as housing materials at customers' option.

Shenzhen KOMAI Automation Technology Co.,Ltd is a high-tech intelligent enterprise integrating R&D, production, sales and system integration. The company has a senior industry research team, a decade of security industry precipitation. Committed to providing customers with safe, convenient and efficient channel access control equipment; and providing the most advanced import and export solutions for smart campuses, smart sites, communities, office buildings, enterprises and government agencies, including card system, QR code Small programs, ticketing systems, fingerprint recognition, iris recognition, palmprint recognition, face recognition, and human identification.