Hydraulic Top Head Drive 15000 Nm Truck Mounted Drill Rig

HYDRAULIC DRILLDRILLING RIG TOP HEAD DRIVE DTH AND MUD HIGH TORQUE

Product selling points

Positive and negative axial pressure adjustment

The best impact efficiency of all kinds of impactors has the best axial pressure and rotation speed. In the process of drilling, with the increasing number of drill pipes, the axial pressure of the impactor is also increasing. Therefore, in the construction, the positive and negative axial pressure valves are adjusted to ensure that the impactor can obtain more matching axial pressure. At this time, the impact efficiency is higher.

Technical Parameters:

Max drilling depth 600 m

Drilliing diameter 105-900 mm

Air pressure 1.6-8 Mpa

Air consumption 16-120 m³/min

Rod length 6 m

Rod diameter 89MM/114MM/127MM

Main shaft pressure 25T

Lifting force 30T

Fast lifting speed 18m/min

Fast fonwarding speed 24m/min

Rotary torque 15000 Nm

Rotary speed 220 r/min

big secondary winch lifting force 3T..

Drilling efficiency 10-35 m/h

Moving speed 3.5 Km/h

Uphill angle 21°

Weight of the rig 28 T

Dimension 11.5×2.6×3.6m

Advantage of water well drilling rig:

1. Construction technology: mud positive circulation drilling, mud reverse circulation drilling, air DTH hammer drilling, air lift reverse circulation drilling, hydraulic DTH hammer drilling

2. In the production stage, the strength of materials we adopt greatly exceeds the specifications and requirements of parameters and actual use, leaving fault-tolerant space for operation, achieving the goal that all parts are not always in full or overloaded working conditions, fundamentally reducing the probability of failure of parts, reducing construction losses and reducing implementation. Labor cost. And install protection, automation equipment, protection equipment, to maximize security and improve operability.

TIANJIN COMMAND MACHINERY MANUFACTURING CO.,LTD Thank you for your attention and support!

    Our company specializes in the production of water well drilling rigs (rotary table, power head), which can meet the requirements of technology: 1 positive mud circulation, 2 reverse mud circulation, 3 air DTH hammer, 4 air lift reverse circulation (without complete crushing, improve drilling efficiency), 5 Hydraulic DTH hammer (without air compressor), engineering drilling rig, agricultural machinery and other mechanical equipment. Committed to providing users with the most suitable equipment for practical use, and has strong design capabilities. Individual product customization can be implemented without any additional charges. We insist on comparing with similar products at home and abroad, and always ensure the advanced nature of our products.

    A good product is not necessarily the most technological and advanced, but it must be the most in line with the actual needs. To make this product, we can not rely solely on designers. We know this well, so we have two groups of design teams for the product. A group of after-sales engineers with more than 30 years of domestic and foreign construction experience, and a group of designers with rich working experience graduated from well-known colleges and universities, which are based on professional division of labor (mechanical design and manufacturing and automation, material forming, mechanical and electronic engineering, manufacturing engineering, etc.). We will combine the rich practical construction experience and the most top professional theoretical knowledge to meet your various needs.

    We are not only familiar with the products, but also familiar with the human environment, construction environment and stratum of domestic and foreign construction areas. We can provide you with all-round product selection suggestions and product customization. To provide you with the greatest technical support to help your cause take off.