Ra 1.5 Aluminum Guide Roller

High Speed Aluminum Alloy Guide Roller For Flexo Printing Machine Good Performance

Specification

Aluminum Alloy Guide Roller widely used for gravure printing machine and flexo printing machine. It is lighter than steel roller and cost lower than same size of steel roller, delivery time and delivery cost is much lower than steel roller too. More and more manufacturers are replacing the steel rollers to Aluminum alloy guide rollers in their machineries.

We have a full set of sewage treatment system. After the oxidation wastewater is treated by the sewage treatment system, it will be discharged into nature after passing the inspection. It will not cause any pollution to the natural environment and contribute our due power to our living environment.

Application:

• Diameter: 25-320mm
• Dynamic balance: <2g
• Surface gloss: Ra 0.4-Ra 6.4
• Concentricity: 0.02mm
• Treatment: Soft anodize HV300, Hard anodize HV700, Teflon, Anilox

Type of Roller

1. Hollow type (With bearing house)
2. Dead shaft type
3. Live shaft type

Type of Groove on surface

• Center line
• Cross line
• Grooved line
• Plain

Aluminum guide roller is high strength, low resistance, light weight, flexible rotation, no-rusty, wearable and corrosion resistance, especially suitable for printing, packaging, plastics, paper, glass, pharmaceutical, electronics batteries, textile machinery and industries.

We can produce all sizes of aluminum alloy guide roller for machines, here are the normal sizes of the roller and customized is available too.

Company History

Ruian Chuangbo Machinery Co., Ltd. established in 1995, is located in Nanbin Street Industrial Zone, Ruian City, Zhejiang Province, PRC. Ruian city has more than 1000 different factory manufacturers and all kinds of machines you can find here

• 1995 Establish Ruian Feiya Mechanical & Electrical Equipment Co.,Ltd.
• 1998 Centrifugal fan, Electric torque motor launched
• 2000 Company moved to Yanjiang east road
• 2001 Air shaft, Air drum launched
• 2002 Company moved to Dongshan Shangbu industries zone
• 2003 Aluminum guide roller launched
• 2009 Established RUIAN CHUANGBO MACHINERY CO.,LTD.
• 2010 Begin to build new plant
• 2011 Move and work in the new Plant
• 2012 Completion Ceremony of the new Plant
• 2013 Granted with self-support import and export rights
• 2019 Listed in Dutch Caribbean Securities

Company introduction

Our main products include aluminum guide roller series, curved roller series, air expand shaft series, centrifugal fan series, axial fan series, torque electric motor and controller series, frequency motor series, magnetic brake / clutch and tension controller serious , pneumatic diaphragm pump serious, electric ink pump serious, low-speed permanent magnet synchronous motor serious and so on. Widely used in printing, packaging, plastics, pharmaceuticals, textiles machinery and industries.

    Ruian Chuangbo Machinery Co., Ltd. established in 1995, is specialized in manufacturing of machinery parts.

    The company has advanced production level and scientific research equipment, the products are matched with printing, packaging, plastics, paper, textile, pharmaceutical machinery and other industries. Our main products include aluminum guide roller series, curved roller series, air expand shaft series, centrifugal fan series, torque electric motor and controller series, frequency motor series, magnetic brake / clutch and tension controller serious , pneumatic diaphragm pump serious and so on.The company has been granted with independent import and export rights, the products sold to allover the country and export to more than thirty countries and regions, such as: India, Pakistan, Israel, Russia, Spain and so on.

In 2015, the company was recognized as “Wenzhou Science and Technology (Innovative) Enterprise; in 2016, it was recognized as “Zhejiang Science and Technology SMEs”; in 2017, it was recognized as a scaled enterprise in Ruian; in 2018, it was recognized as “National High-Tech enterprise” and also awarded Wenzhou Technology R&D Center Enterprise; in 2019, company listed in Dutch Caribbean Securities.

    Company now is the member of the National Printing Machinery Standardization Technical Committee, and has 3 invention patents and 33 utility model patents.

    The company insists on the concept as "Branding Chuangbo, Satisfying customers and innovating constantly", implements ISO9001 standards and striving for excellence to ensure the product as leading ranks for domestic and international markets, provide the markets with stable quality, reasonable price, highly quality and newly competitive products. The company will continue to innovation to meet higher requirements and is willing to cooperate sincerely with all friends at home and abroad by high-quality products.