30W LED Security Flood Light

Ex-Pendant light fittings and floodlights of the series LCD-BHD7100-XXX

The BHD7100 series of LED pendant light fittings in IEC metallic design is suitable for operation in hazardous areas in Zone 1/2 and Zones 21/22, in particular in harsh environments with high mechanical load, moisture and dust.
The lights are available in one size for 5 different wattage from 30W to 70W:

>>> The low wattage 30W to 50W version can replace for traditional high-pressure discharge lamps from 70 W to 250 W;

>>> The high wattage 60W to 70W version can replace for traditional high-pressure discharge lamps of 250 W and 400 W.

All versions can be operated for both Zone 1 & 21 and Zone 2 & 22 and are suitable for low and medium suspension heights.

Thanks to their high degree of ingress protection and wide temperature range, this series can also be used under extreme conditions.

Features
• LCD-BHD7100 pendant light fittings for Zone 1 & 21 and Zone 2 & 22 applications.
• From 30 W to 70 W and replacing traditional high-pressure discharge lamps 70W to 400W saving power 60%- 75%.
• Wide temperature range from -30 °C up to +55 °C
• High degree of ingress protection IP66 for harsh environments

Wide range of applications

The BHD7100 lighting series is suitable for wall, ceiling and pole mounting. This makes them the ideal solution for almost
any industrial applications, such as the illumination of open spaces, indoor areas and roadways in industrial plants in the
oil and gas industry, chemical plants, waste disposal facilities, shipyards, power stations and Mills.

Descriptions
- Service life over 60,000 hours
- Over 70% less energy consumption comparing to HID
- Easy to install low maintenance costs
- Unique horizontal tri-chamber structure
- Excellent 180° illumination
- Emergency type available battery built-in
- Zone 1, 2, 21 22


Features and benefits
• Energy-efficient: compared with conventional lighting, LED consumes up to 85% less energy.
• Long life: last to 60,000h rated life o more, 50 times of incandescent bulbs, 8 times of fluorescent lamps.
• High light efficiency: dedicated honeycomb mirror enhance bigger lighting area, uniform illumination.
• Horizontal tri-chamber constructure, ensures LED heat will not affect driver and wiring parts.
• Optimized heat sink: aluminum housing with air diversion structure removes heat from the LEDs and driver to ensue longer life.
• Excellent 180° illumination, meet high illumination demand.
• Wide voltage range: AC220V type can operate within 90-260V range.
• Multi-protection: constant current with short-circuit and overvoltage protection.
• Good EMC: excellent electromagnetic compatibility and anti-interference.
• SMT technology: surface mounting technology keeps low working temperature of LED chip.
• Standard material: copper-free Aluminum housing, surface with epoxy powder coating, tempered glass and stainless steel external hardware.
• Emergency type: 20/30W can be battery bun, last to 60 minutes working after power cut.

Application

Ideal for environments with flammable gases, mists, vapors or dusts.
• Petrochemical plants
• Chemical plants
• Pharmaceutical Factories
Gas explosive zone enviroment:
Class 1, Zone 1, Zone 2, Zone 21, Zone 22

Executive standard
·IEC 60079-0:2007
·IEC 60079-15:2010
·IEC 60079-31:2008
·EN 60079-0:2011
·EN 60079-15:2010
·EN 60079-31:2009
·EN 60598-1:2008+A11:2009
·EN 55015:2013
·IEC 62321:2008

Division

·ATEX Zone 1 & 2 & 21 & 22
·Class I Divison 2 Groups A, B, C, D
·Class II Divison 2 Groups F,G
·Class III Divison 2

Certifications & Ratings

·Exd IIC T6 Gb
·Ex tD A 21 IP66 T80ºC
·ATEX Compliant
·ABS Compliant
·CE Compliant
·RoHS Compliant
·IP 66 Rated

Characteristic details

Performance patameter

Photometric parameters

General information

Candela distribution

Products Dimension

INSTALLATION METHOD

LCD-CESP is the leading innovator in Lighting design.

We strive to offer the best service to our customers

Our lighting products are market leaders and have many unique features.

We offer a minimum of 5 years warranty.

Most of all Customer satisfaction is our priority.

Our R+D team have many years in the lighting Industry and we offer the following skills to our customers-

Mechanical design

Electronic design

Optic testing

We are sourcing components to the highest specification.

Our manufacturing and assembly processes are to ISO 9001 and ISO 1400 requirements.

We offer customisation and design services.