20mADC ExdⅡCT4//ExdⅢCT130 Explosion Proof Electric Actuator

Explosion proof DC rotary electric actuator / ExdⅡC T4 grade for Zone 1 and Division 1

Description

DCL-Ex10GE/Ex40GE are 24VDC power motorized electric actuator. Full enclosed DC brush motor with flameproof surface ensure sparks will not go to another cavity. Fully potted controller to help protect the electronics from vibration and moisture. Cylinder stop type connection surfaces with flame proof gap and length comply to ATEX, UL and CSA standard. Valve position indicator is covered with 10mm tempered glass that can keep strength in extra high and extra low temperature to ensure clear vision even when fire happens. Anti-condensation heater is optional to protect actuator against moist. Enclosures and covers are 100% tested by DCL before acceptable from suppliers to ensure machining precise.

DCL explosion proof electric actuators are widely used for explosive gases environment. High temperature may ignite the flammable gases out of actuator. T4 grade requires the highest enclosure outside surface’s temperature must be less than 135℃(300F), in whatever conditions. Considering a buffer for errors may happen, the temperature set for motor power down is 125℃(282F). PTC overheat protector is embedded in the motor winding-trips, where is the highest temperature rise part of whole actuator, instead of out of motor, to 100% ensure outer surface temperature will not go beyond required T4 grade.

Explosion proof electric actuators are in process of CSA tests and will be certified by CSA in Q3 2020. CE/ATEX/RoHS 3.0 have been tested and complied.

Features

• Modulating type powered by 24VDC, quarter turn operation
• Torque can be precisely setting within a certain range
• Heavy duty DC brush motor with lower temperature rise, longer life, provide high start torque and very small inertia force
• Torque test control and over torque protection by current
• PTC electronic heating component to prevent condensation in actuator
• Compact smart resin plastic packaged proportional control pack installed
• IP 68 watertight robust aluminum alloy enclosure, protection against dust and water
• Self-locking worm gear train, no additional brake needed
• UL standard for Zone and Division System/ATEX/CE marked/RoHS 3 complied

Founded in 2001, Dynamic Corporation Limited(DCL) is a national high-tech enterprise, which is engaged in R&D, manufacturing and sale of Electric Actuator, Electric Valve and its Automation Control System. The main leading product, DCL Series Electric Actuator is featuring the compact construction, exquisite appearance, smart control, remarkable performance,easy operation and so on.

DCL series electric actuators are widely used in various industrial field, such as HVAC, refrigeration, petroleum, chemical, electric power, smelting, energy, pharmaceutical, paper-making, water treatment, food, brewage, shipbuilding and combustion system etc. DCL has estabilished stable partnership with lots of world leading companies in each industry to provide best flow control solutions. Every year, DCL also exports over 10000 units self-produced electric actuators and electric valves to USA and Germany.

In the past 19 years, DCL has winned high trust-worthy from customers. Many customers with many years practices confirm that our products are outstanding in stable quality, reliability, durability and after-sale service.

1. Manufacture per ISO9001:2015 standard with certification

2. Products are CE marked/ATEX marked with QAN by SGS group

3. Products are certificated per UL and CSA standard by CSA group

DCL does not only provide good quality products, but also present responsibility to the society and community. All our employees regard quality first. Quality control has a long uninterrupted way to go. Quality first is our management culture and the foundation of our company.