Pharmaceutical Fluid Bed Dryer Granulator

FL Series Pharmaceutical multifunctional one step Fluid Bed Spray Granulation

Pellet Granulator has these functions:

Mixing:All products which can be fluidized e.g. powder, granules, extrudates, pellets etc. are homogeneously mixed in the Jinggong DPL fluid bed process unit. By the special process air flow (horizontal , radial and tangential ) the mixing behaving is particularly good.

Drying:All products which can be fluidized up to every residual moisture physically possible.

Granulation

Powdery products. By spraying of binders nearly every requested granules can be produced.

Principle
The powder material in container (fluid bed) is in the state of annular fluidization. It is preheated and mixed with clean and heated air. At the same time, the solution of adhesive solvent is fogged and sprayed into the container. It makes some of particles become granules that contains adhesive. Being of ceaselessly dry in hot air, the moisture in the granule is evaporated and the adhesive is solidify. The process is carried out continuously. Finally it forms ideal, uniform and porous granules

Features

1. with high drying efficiency

2. can print and record operation parameters under the control of PLC and HMI.

3. Inlet handling system consists 3 grades filter

4. Exhaust air can be designed as the customers’ requirments.

5. Lifter unloading or vacuum unloading is designed to form dust free unloading,meets with the GMP.

6. Anti-explosion is optional to guarantee safty.

7. Dehumidification system and WIP online cleaning system are optional

Technical Parameters

All datas for reference only. According to the material features, we have the right to change but not notice, pardon!