Omron Remote Terminal Source SRT2-OD16T

SRT2-OD16T OMRON REMOTE TERMINAL SOURCE:24V DC OUTPUT

Product Details

SRT2 models support both high-speed communications (750 kbps) and longdistance communications (500 m) systems, switch selected.

SRT1 models support only high-speed communications systems.

Two independent power supplies can be used because the I/O terminals are isolated from the internal circuits.

DIN track and screw mounting.

Outputs

Rated output current 0.3 A/point

Residual voltage 0.6 V max.

Leakage current 0.1 mA max.

Insulation method Photocoupler

Output indicators LED (yellow)

Communications power supply voltage 14 to 26.4 VDC

I/O power supply voltage 24 VDC +10%/--15%

I/O power supply current 1 A max.

Current consumption (See Note) 50 mA max. at 24 VDC

Connection method:

Multi-drop method and T-branch method;

Secondary branches cannot be connected to T-branch lines.

Connecting Units:

4-point and 8-point Terminals: 16 Input Terminals and 16 Output Terminals per Master;

16-point Terminals: 8 Input Terminals and 8 Output Terminals per Master.

Mounting strength No damage when 50 N pull load was applied for 10 s in all directions

Terminal strength No damage when 50 N pull load was applied for 10 s

Screw tightening torque 0.6 to 1.18 N : m

Ambient temperature:

Operating: 0°C to 55°C (32°F to 131°F) with no icing or condensation;

Storage: --20°C to 65°C (--4°F to 149°F) with no icing or condensation.

Ambient humidity Operating: 35% to 85% RH

Moore News

METALLURGICAL INDUSTRY

Metallurgical Industry Capability
Blast furnace ironmaking is the use of iron-containing raw materials (sinter, pellet or iron ore), fuel (coke, coal powder, etc.) and other auxiliary materials (limestone, dolomite, manganese ore, etc.)
The blast furnace is charged into a certain proportion, and hot air is blown into the blast furnace to help the coke burn, and the raw materials and fuel are lowered as the smelting process in the furnace progresses.
In the process of falling material and gas rising, heat transfer, reduction, melting and decarbonization occur successively to produce pig iron.
The impurities in the iron ore raw material are combined with the flux added to the furnace to form a slag, and the molten iron at the bottom of the furnace is intermittently discharged into the molten iron tank.
Sent to the steel mill. At the same time, it produces blast furnace gas and slag two by-products. After blast furnace slag water quenching, all of them are used as raw materials for cement production.

More Products

Contact Us

miya@mvme.cn(Click)

Email: miya@mvme.cn

QQ: 2851195450

Tel: 86-18020776792

Skype: miyazheng52

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.