Low Pressure Industrial Centrifugal Fans Belt Drive Large Flow Low Speed

Low Pressure Industrial Centrifugal Fans Belt Drive Large Flow Low Speed

This series of centrifugal fan has large flow, low pressure, high efficiency, low noise and stable performance curve. Usually used for supporting drying equipment. The drying temperature must not exceed 80 ° C. Can be used to dry grain and tea. It can also be used as industrial drying clinker.

1. Impeller:
Consists of tilting circular arc thin plate blade, curve front plate and flat plate rear disc, all made of steel plate and corrected by static and dynamic balance, air performance is good, efficiency is high, noise is low, operation is stable. 3. 5 is composed of 12 leaves, 4. 5 is composed of 14 leaves, and more than 5 is composed of 16 pieces.
2. Housing:
Made into two different types, the 3-12 housing is integrated and can not be disassembled; the 14-20 housing is made into two open types, divided in two halves along the middle horizontal plane and connected by bolts.
3.Inlet:
Made into a whole, installed on one side of the fan, parallel to the axial section of the curve shape, can make the gas enter the impeller smoothly, and the loss is relatively small.
4.Transmission:
Consists of spindle, bearing box, rolling bearing and belt wheel.

Fan Type
The fan shall be of the single-inlet centrifugal type with the backward curved steel wheel. The drive types shall be direct, coupling or belt.
Standards and Codes
The design and manufacturing of the fan shall comply with JB/T 10563-2006 Technical Specification for General Purposes Centrifugal Fans; The wheel dynamic balancing test shall comply with JB/T 9101-1999 Fan Rotor Balance; The wheel overspeed test shall comply with JB/T 6445-2005 Overspeed Test for Industrial Fan Impeller; The air performance test shall comply with JB/T AMCA 210-99 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating. The welding technique shall comply with JB/T 10213-2000 Technical Specification for Fan Welding Inspection; The fan safety shall comply with GB/T 19074-2003 Industrial fans--Mechanical safety of fans--Guarding.

Centrifugal fan production process:

Case Show:

Henan Dajing Fan Technology Co., Ltd. is located in the hinterland city of the Central Plains and Pearl in the north of Henan Province-Xinxiang. Three thousand boulevards, choose one and follow from one; focus on one, great future! Since its inception, our company has been positioned to be the only quality standard based on customer satisfaction. Strictly implement various standards, focus on the field of ventilation, and committed to creating a good environment!

The company continuously exchanges with the Chinese general machinery industry department, accumulate rich technical experience, studies and absorbs the domestic and foreignadvanced manufacture technology of the same industry, uses the advanced CAD assistant design, develops and designs many kinds of low noise by oneself, new products with high wear resistance. The pursuit of science and technology and quality is endless.

Equipped with high-speed fiber laser cutting machine, CNC spinning machine, high-precision dynamic balancing machine, automatic on-site vibration balancer, comprehensive tester and other special equipment for fan manufacturing, and the introduction of international advanced 6 s management to ensure that every part of the excellence.

Our products are widely used in power plant, boiler, kiln, mine, metallurgy, petroleum, chemical industry, chemical fertilizer, cement, paper making, drying, breeding, environmental protection ,dust removal and so on.With anti-corrosion, explosion-proof, low noise, high temperature resistance, high wear resistant and other characteristics. In addition to standard models, we can also provide all kinds of non-standard models according to the needs of customers. The products are well-selling at home and abroad, and have been repeatedly praised.