High Strength Electricity Pylons , 4 Legged Steel Lattice Masts Structure

Power Transmission Electric Pylone 4 Legged Steel Lattice Masts

1.Production decription

We are professional manufacturer of electicity pylone used in high voltage AC and DC systems from 2009.

Heigth from 9m to 100m

Electricity pylons Voltage from 10-1000KV

The electricity pylons meet ASTM Standards,GB/T standards and related standards .

Steel grades
Tower legs: Chinese standard Q345B, which equal to ASTM A572 Grade 50
Others members: Chinese Q235B, which equal to ASTM A36
Bolts: Chinese grade 6.8 and 8.8, which equal to ASTM A394

Dimension and tolerance for angle : GB/T1591-1994, Equal to EN 10056-1/2
Hot dip galvanization: GB/T 13912-2002, which similar to ASTM A 123

The welding :AWS D1.1 or CWB standard

If the thickness of the material not less than 5mm,The min average thickness of the galvanization of

steel tower is more than 86um.

Type test and preshipment test is accepted .

If needed ,we even can supply an engineer for help installing the pylone structures.

2. Product capacity

We have 5 auto production line for electric transmission towers Manufacturing,We can supply 3000 tons lattice steel tower

every month .Else we have enogh site for installing more production line if needed.

We also have plasma cutting machine ,14m bending machine and auto welding machines for pole towers .

​

​3. Technical support

Our engineer and drawer has lots of designing ,lofting experience of lattice steel towers .

Which we can supply a overall solution of all the towers .

4. Quality control

We have very strict quality control in every steel towers .

Material incoming control:chemical and physical test

Zinc coating thinknes inspection

• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

We usually has two ways of trial assembly for lattice steel towers : trial assembly before galvanzation

and after galvanization.

6. Hot dip galvanization and painting

7. Package and delivery

Package we usually do as our clients requirment .Usually for angle steel towers,We use steel wire to make it into bundle and use special material to protect the Zinc.

8. Product catalogue:

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission line towers (the voltage up to 500kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers ‘requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 60,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• - Environmental Management System Certificate: ISO14001:2015
• - Quality Management Systems Certificate: ISO9001:2015
• - Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

Welcome to contact us ,we make sure your every question will be answered in time .