Radio Wifi Antenna Mobile Cell Tower 20m Height ASTM A123 Galvanization Standards

20m Radio Wifi Antenna Mobile Cel Tower GSM Cellular Self Supporting Lattice Telecom Steel Tower

1. Production decription

The mobile cell tower consists of tower body ,Working platform,rest platform ,lighting rod ,ladder and antenna support.

The specification of our mobile cell towers as following:

Height : 5-100M

Wind Pressure: 0-300 KM/H

Material :

Q345B/A572, Gr50 /S355JR minimum yield strength >=345MPA;

Q235B/A36/S235JR, minimum yield strength>=235MPA

Details & Shape : Can be designed as per customer's requirement

Good's Description : Cable and Ladder can be assembled by customer's requestment

Surface : Hot Dip Galvanization or color painting

Connection : Overlapping or flange connection

Galvanizing Standard: EN ISO 1461,ASTM/A123 or equivalent

Working & Resting Platform Quantity: 1-3 PCS

Antenna Support: 3-18 PCS

Microwave Dish: 3-18 PCS

Certificate : ISO9001-2015,ISO14001-2015,OHSAS45001-2015,SGS

Welding Standard : BSEN287, BSEN288 or equivalent

Fasteners: Grade 8.8,grade 6.8 or grade 4.8

Catalogue of certificatge as followings :

Terms and condition:

Price Term: EXW, FOB, CFR or CIF, FCA and so on

Shipping port: Qingdao port

Payment Term: Usually 30% by T/T as deposit balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.

Delivery Time: Usually 30 days after PO/drawing/prepayment confirmed.

Package: Normally we use steel wire to make the angle into bundle ,then use special material to protect the zinc, or according to client’s requirement.

Please provide drawings if you have so that we can calculate the accurate price for you.

We also provide design according to your requests, if you don't have drawings.

2. Production capacity

​

3. Technical support

​

4. Quality Control

Material incoming control:chemical and physical test

Zinc coating thinknes inspection

We usually has two ways of trial assembly: trial assembly before galvanzation and after galvanization

6. Hot dip galvanization and painting

7. Package and delivery

8. Company introduction

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2005,is a leading professional manufacturer in the field of transmission line towers (the voltage up to 500kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 60,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.

Welcome to contact us ,we make sure your every question will be answered in time .

9. Product catalogue:

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission line towers (the voltage up to 500kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers ‘requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 60,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• - Environmental Management System Certificate: ISO14001:2015
• - Quality Management Systems Certificate: ISO9001:2015
• - Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

Welcome to contact us ,we make sure your every question will be answered in time .