Anti Splash Medical Safety Goggles , Durable Medical Protective Goggles

Medical Safety Goggles Anti-Splash goggles medical safety glasses eye protection goggles

1. Put the goggles together and disinfect them.

2. Soak in chlorine-containing disinfectant with effective chlorine 1000mg-2000mg/L for 30-60 minutes to disinfect.

3. Then rinse with running water and wipe with 75% medical alcohol.

4. Finally, according to the instruction, high temperature drying cabinet can be selected for thermal drying, and hospitals with conditions can also conduct mechanical thermal disinfection or low temperature sterilization.

1. Wearing method: wear goggles with both hands to adjust the comfort level.

2. Removal method: take it off by pinching the side near the head or ear and put it in a container for recycling or clinical waste.

Precautions:

1. Before wearing, check whether there is any damage and whether the wearing device is loose;

2. Once contaminated by the patient's body fluids or blood, it should be cleaned and disinfected immediately.

3. Clean and disinfect after each use

Daily travel cases do not need to wear goggles, but if need goggles shade, avoid direct light eyes, or respiratory diseases have a splash of occasions to buy to wear goggles, the general population, that is, if is to prevent the virus to wear goggles in the care of cases or suspected cases and in patients with suspected or may be patients within one meter, it is necessary to wear goggles to avoid virus droplets air enter the body through the eye conjunctiva, if not wear goggles or perhaps with suspected patients speech should keep a distance of two metres away again.And in the case of life will not come into contact with the case, just wear a mask to protect the mouth, nose, do not need to wear goggles.

Z&D Technology Co.,Ltd   specializes in the manufacture of disposable and nonwoven series, such as bouffant caps, face masks, shoe covers, boot covers, lab coats, coveralls, oversleeves, etc. We can do processing with imported materials and processing with supplied materials.We welcome your visiting anytime!

With over ten years of regional manufacturing experience, advanced equipment, from selecting the raw materials to the processing with the imported materials, to testing product, a series of strict management system and clean production environment, we can produce any quantities as your needs, duplicate your existing package design, and also create a package design that will uniquely brand your company’s product.