8KW Non Woven Face Mask Making Machine Semi Automatic Low Scrap Rate Easy Operation

Non woven disposable face mask making machine

1. Introduction to equipment

The automatic mask body machine is mainly used for the automatic forming of flat plane masks. After the entire roll of fabric is
unrolled, it is driven by rollers.Thefabric is automatically unfolded by automatic hemming, hemming, and the nose bridge. In
both sides, the sealing is achieved by ultrasonic welding on both sides. After the ultrasonic side sealing, cuttingisperformed by
a cutter, and thewhole process is automatically controlled. Only one person is required to operate this machine. The scientific
and reasonable mechanicaltransmission configuration makes this machine extremely efficient. The special welding wheel and
cutter wheel design have good abrasion resistance and greatly increase the service life of the product.

2. Equipment installation and configuration requirements
Equipment size: 3500mm (L) x 1100mm(W) x 2100mm (H);
Equipment weight:1600KG
Working voltage: AC220V,50 / 60HZ, rated power: 4KW
Compressed air: 0.5-0.7Mpa
Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no flammability, corrosive gas, no dust (cleanness noless
than 100,000)

3. Equipment characteristics
The machine adopts aluminum alloy structure, small size, stable operation and low scrap rate;
Equippedwith photoelectricdetection and automatic counting, which can control the production speed and high output;
It can produce 100 pieces per minute, and can produce (3-6 layers) multilayer masks.

Our Company was founded in 1992. For much experience in face mask making machine, we have dedicate to putting the innovations into practice to satisfy the needs of customer. Packer 

Our Advantages:

– We are professional manufacturer of face mask making machine and have professional technical team, focus on provide high quality equipment and good service for customer.

– Our plant with area of 7600 square meters, 62 employees. All skill workers have professional skills certificates.

– We have professional production QC team to ensure the machine manufacturing quality.

– All equipment are running test before shipment.

– During customer visit, we can take customer to our customer ‘s factory to looking machine working.