3 Inch REMET Thread Reverse Circulation RC Rods Of 3m Length For RE531 Hammer

3.0inch REMET RC Rods of 3m each

3 inch REMET RC Rods of 3m Hammers used are the DTA DR 38 and RE531 hammers

3 inch REMET thread Reverse Circulation RC Rods of 3m length for RE531 Hammer

3.0inch REMET RC Rods of 3m each

The reverse circulation drill rod has four threads which adds to machine operating time. The purpose of the two extra threads is to allow the inner tube to be replaced in the field. It also allows the driller to replace the box tool joint with a new tool joint, without welding and can be done at the site.

We use heat threaded 4130 alloy tool joints; this alloy allows driller to employ a hardfacing program without fear of embitterment. We use a microalloy midsection (midbody), ST52V, 90KS1 MIL VLD possessing a superior abrasion resistance.

Our inner tube midsection (midbody) is a heavy-wall mechanical tube, not a pipe. The inner tube is fixed and won't vibrate under most conditions. The inner tube ends are made from a heat treated alloy and the male end is machine finished after welding for perfect alignment.

The o-ring retainers absorb the percussion forces to eliminate problems arising from the transfer of vibration and torque loads to the outer pipe.

Reverse circulation drill rod

RC Rock Bit Adaptor 2 7/8 O-Ring.Body
RC Rock Bit Adaptor 2 7/8 O-Ring.Body

RC 4in/102 mm Box to NCC Pin Adaptor
RC 4in/102 mm Box to NCC Pin Adaptor

Inner Tube Tester 4"
Inner Tube Tester 4"

RC 4in/102 mm Saver Sub Pin to 4-1/2in
RC 4in/102 mm Saver Sub Pin to 4-1/2in

Interchange Top Sub 4.50" O.D.
Interchange Top Sub 4.50" O.D.

WRENCH KEY 4"
WRENCH KEY 4"

Rock Bit Adapter Wear Sleeve 5" O.D.
Rock Bit Adapter Wear Sleeve 5" O.D.

Rock Bit Adapter Wear Sleeve 4 7/8" O.D.
Rock Bit Adapter Wear Sleeve 4 7/8" O.D.

Rock Bit Adapter Valve Bladder
Rock Bit Adapter Valve Bladder

Bladder Loader 4"
Bladder Loader 4"

RC 4" Back Reamer Assembly 35-540-M40
RC 4" Back Reamer Assembly 35-540-M40

RC Rock Bit Adaptor 2 7/8 Q-Thrd.Body
RC Rock Bit Adaptor 2 7/8 Q-Thrd.Body
Crossover Interchange Sub
Crossover Interchange Sub

RC 4in/102 mm Rock Bit Adaptor Ass.
RC 4in/102 mm Rock Bit Adaptor Ass.

RC 4in/102 mm Box to HCC Pin Adaptor
RC 4in/102 mm Box to HCC Pin Adaptor

Interchange Top Sub 5.00" O.D.
Interchange Top Sub 5.00" O.D.

RC 4in/102 mm O-RING
RC 4in/102 mm O-RING

RC Saver Sub
RC Saver Sub

Rock Bit Adapter Wear Sleeve 4 5/8 O.D.Q.Tread
Rock Bit Adapter Wear Sleeve 4 5/8 O.D.Q.Tread

Rock Bit Adapter Wear Sleeve 4-3/8 O.D. V.Thread
Rock Bit Adapter Wear Sleeve 4-3/8 O.D. V.Thread

RC 4in/102 mm Rock Bit Inner Tube
RC 4in/102 mm Rock Bit Inner Tube

RC Rock Bit Adaptor 2 3/8 V-Thrd.Body
RC Rock Bit Adaptor 2 3/8 V-Thrd.Body

RC 4in Back Reamer Inner Tube 35-540-M40
RC 4in Back Reamer Inner Tube 35-540-M40

Keywords:

RC Hammers
Reverse Circulation hammers
boart longyear Reverse Circulation hammers
Reverse Circulation hammers
reverse circulation swivel
what is reverse circulation drilling
reverse circulation drill pipe
dual tube reverse circulation drilling
Reverse Circulation RC Hammers
Reverse Circulation Hammers and Bits
Reverse Circulation Hammers & Bits
RC Drill Hammers
Reverse Circulation RC Drilling
Reverse Circulation DTH Hammer
Down the Hole Drilling Tools
Reverse Circulation Hammer
Rock drilling tools
reverse circulation swivel
Halco RC bits
Halco RC hammers
Halco RC hammers bits
Halco reverse circulation
Halco reverse circulation bits
Halco reverse circulation hammer
what is reverse circulation drilling
reverse circulation drill pipe
dual tube reverse circulation drilling
​Altas copco RC 50 Hammer
Atlas copco Secoroc RC50 hammer
Atlas copco Reverse Circulation hammer
Secoroc Reverse Circulation hammer
Reverse Circulation Drill Rods
Reverse Circulation Drill Rod
Reverse Circulation Drill Rigs
Reverse Circulation Drill Rigs for sale
Reverse Circulation Drill Rigs for sale used
dual tube reverse circulation drilling
reverse circulation drilling process
reverse circulation drill pipe
what is reverse circulation drilling
matrix drill pipe
numa hammers
numa reverse circulation bits
numa reverse circulation hammer
RC bits
reverse circulation bits
reverse circulation hammer
RC hammers
reverse circulation RC hammer
dual wall reverse circulation drilling
reverse air drilling
Reverse Circulation RC Drill Rods
Reverse Circulation RC Drilling Rods
Reverse circulation rods - Technidrill
Reverse Circulation Drill Rods and Pipe
Related searches for Reverse Circulation Drill Rods
dual tube reverse circulation drilling
reverse circulation drilling process
reverse circulation drill pipe
what is reverse circulation drilling
matrix drill pipe
reverse circulation bits
dual wall reverse circulation drilling
reverse air drilling
Dual Tube Drill Rod
Reverse Circulation Drilling
Dual Tube Drill Rod for Reverse Circulation Drilling for sale
Premium Reverse Circulation Drilling Pipes
Reverse Circulation Drilling Pipe, reverse circulation pipe, Reverse Circulation Well Drilling Pipe, rc drilling pipe, drilling pipe, drilling rod, dual tube drilling pipe

Reverse Circulation Performance Tooling
Reverse Circulation Drill Rods 4 in OD
Reverse Circulation Pipe
Reverse Circulation Drilling
Reverse Circulation
Reverse Circulation Drilling with Patented Grout Through
Reverse Circulation Drilling Programs
Reverse Circulation (RC) Drilling
Reverse Circulation rods
Reverse Circulation rotary drilling
reverse circulation swivel
what is reverse circulation drilling
dual tube reverse circulation drilling
reverse circulation drill pipe

For more information, please contact:

ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 6419 5009 ; +86-135 8585 5390

WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390

Email: roschen@roschen.com ; roschen@roschen.net

Website: http://www.roschen.com ; http://www.roschen.net

http://www.roschen.cn ; http://www.roschendrill.com

http://www.roschenmining.com ; http://www.roschendrilling.com

 ROSCHEN GROUP

ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mineral tools, equipment products quality stable and reliable.

ROSCHEN Group Limited is a manufactory with years of research and development for the mining, mineral tools, equipment. We are capability to produce high performance world class products and control excellent quality. Our main product includes tricone bit, diamond core bits, drill pipe, core barrel, TCI tricone bit, mill tooth tricone bit, RC hammer, DTH bit, etc.

ROSCHEN Manufactory PROCESS

ROSCHEN Sales Value Growing Up!

ROSCHEN'S MISSION

1. Strive to create and supply Best quality products for the industry that last longer than the average products.

2. Provide excellent service for our clients.  24 hour-7 days /week schedule to get our clients what they need – FAST.