Dust Resistance Self Lubricating Sleeve Bearings Dynamic Load Bearing

JDB-1 brass inlaid self-lubricating bearing

Material organization

JDB-1 brass inlaid self-lubricating bearing is made of high-strength copper alloy as the base material. According to the working condition, the hole is machined in the working surface according to the working condition and filled with solid lubricant. The high-strength copper alloy provides high load. The ability of a solid lubricant can form a lower friction pair.

The company develops and innovates, continuously absorbs industry specialties, introduces advanced equipment, adopts advanced technology, and produces various model specifications. oilless self-lubricating bearings, bushings, bushings, copper sleeves and other products.

Substrate properties

It is suitable for occasions where reciprocating, rotating and oscillating are frequently started and it is difficult to form an oil film.

Has a very low and stable friction factor, no "sticking" phenomenon;

It is resistant to dust, corrosion, impact and edge load;

The metal substrate has good shock absorbing ability;

Can be used in a wide temperature range;

Technical Parameters

typical application

Metal self-lubricating bearings can be used in dry friction, high temperature, high pressure, corrosive environment, humidity and chemicals. They are widely used in automobile production lines, hydraulic engineering, reservoir gates, injection molding machines, continuous casting machines, metallurgical machinery, mining machinery. , turbine generators, hydroelectric generators and other fields.