ODM Metal Manhole Cover EN124 D400 Ductile Iron GJS-500-7 - EN 1563 Municipal Construction

ODM Metal Manhole Cover EN124 D400 Ductile Iron GJS-500-7 - EN 1563

Applications:

Cast iron manhole covers are generally divided into round and square. In the urban area, circular is generally used, because the round manhole cover is not easy to tilt, which can better protect the safety of pedestrians and vehicles. The use of a circle is mainly due to the fact that the circular manhole cover has the same length through each of its centers, so that if the manhole cover is rolled up by the passing vehicle, the diameter will be slightly smaller than the wellhead below. Wide, the manhole cover will not fall into the wellhead. If square is used, because the diagonal of the square is obviously longer than the length of each side, when the manhole cover is rolled up, it is easy to fall into the well along the diagonal direction of the wellhead, causing security risks. If the wellhead is rounded or significantly smaller than the manhole cover, the square manhole cover will not fall into the well. This involves the problem of utilization and savings of a material. The use of the wellhead depends on the size of the wellhead. If a square manhole cover with a much larger area than the wellhead is to be installed on it, then the material utilization and practical value are naturally not more effective than using a circular manhole cover directly, which not only saves the material of the manhole cover, but also The safety of the wellhead is ensured and used in the countryside and cable wells, generally square, which can better prevent the entry of liquids such as rainwater.

Description:

Ductile iron GJS-500-7 - EN 1563 manhole cover, produced according to provisions of the latest edition of the UNI EN 124, loading class D400, consists of a square/octagonal frame, as supporting base and circular at the top, corresponding to he street level, provided with: a continuous perimetral outer winglet of a width not less than mm. 20, to obtain a greater supporting base and allow a better anchorage to the foundation also by means of elongated holes and/or holes created along the perimeter and through the use of any mechanical means for fixing to the manhole; “U” shaped internal seat; elas-tomeric cushioning insert, anti-noise and anti-rocking, suitably shaped to frontally withstand the edge of the cover and absorb vibrations; hinge housing with closed bottom and cover locking system in open position. Cover of circular shape, self-centering in the frame, provided with: slot, for the inserting of the opening and lifting key, locking system in steel realized by means of a rotating bolt, bolted with helical spring of contrast; an appendix suitable to ensure the positioning of the cover to the frame in the hinge compartment without preventing the extractability of the cover; central and circumferential space for the insertion of any inscription (e.g. contractor entity + etc.); identification of the outer shape of the frame and of the product size, expressed in cms.; anti-slippery reliefs.

Product Benefits:

1. No inherent scrap value thus reducing risk of theft.

2. Moderate weight and easy installation.

3. Can be used in -30℃ to 70 ℃degrees environment.

4. 30 years of service life.

5. Tested by national security agencies. Compressive, bending and impact resistant. Heat, cold, acid, etc.

6. Corrosion resistance, meet the needs of environmental protection, and reduce the exploitation of mining resources; beautify the city, classify the coloring, and enhance the taste of the city.

SUZHOU SENSE INDUSTRY CO., LTD is a professional manufacturer of casting products and export any kinds of castings, founded in 2019. We specialize in Drainage, Construction, Municipal Products & Services.

We have rich experience in the production and export of castings, such as manhole cover and pipe fittings. The annual production capability is about 8000 tons.

Our company mainly manange best construction and municipal products which include:

1, Municipal casting Division ( DI pipe fittings, manhole covers, Ductile iron pipes, Valves, Universal Couplings and all types of ODM&OEM products)

2, Industrial Casting Division ( Ductile iron castings and Resin sand Castings)

Now we have over 5000 kinds of moulds for castings and fittings which are produced according to standards: EN124-2, EN1433, BS4772 etc. We update new facility of an automatic double station horizontal static pressure molding line, robotic drilling machine, automatic recycling sand plant., automatic shot blasting and grinding machine and a painting line.

Our company regards high-quality as an essential and integral part of our business success and we have attained ISO9001:2015 certification. The products are sold well and widely trusted around the world: The United Kingdom, the United States, Italy, Spain, South Korea, South Africa, Chile, Singapore and other countries with advanced equipment, strong technical force and high quality.

Our aim is to provide all of our customers with the high-quality products and competitive price. Looking forward to the future, we will be continuing to play an important role as a high-tech, high-quality and reliable supplier around the world.