Durable Industrial Hot Water Boiler System Natural Circulation 0.2t Steam Capacity

LSH Series 0.2 tons per hour Normal Pressure Biomass Fired Steam Boiler

Product Discription

LSH Series Vertical Biomass Fired Steam Boiler

The LSH0.9-0.7-T boiler is a vertical stream-time boiler material, and an inlet device is installed at the bottom of the furnace. The boiler is a horizontal pipe located in the assembling chamber and in the back part of the furnace, its main function is to increase the temperature of the boiler and improve the thermal performance. RITA is also equipped with an economizer, so that high heat flow is used.

After fueling the ceilings, the cement is made directly from the furnace and horizontal pipes, allowing the chimney to move to the chimney stack, which is economically affected by the fireplace and the chimney. In the pumped cleaning machine. After the soil is exhausted, the chimney enters the chimney and the final clean pipe is discharged through the chimney into the atmosphere. The sutural part is inserted into the right hole through the right side of the hole, and the artificial shell is removed through the wall door. This section covers the lower part of the downstream flow of the chimney, which reduces artificial flow from the lower and ramp pools to clear space.

Product Features

1. Easy to install

Usually Baile is a fast installation factor, which is easy to replicate and install on-site, which greatly increases the duration of construction, saves installation costs, and enables boilers to be produced in time.

2. Reliable operation:

The boiler is reasonably well-adjusted to the heating surface, the water circulation is soft, and every heat level is timely, which effectively ensures the safe operation of the boiler.

3. Easy maintenance

To access the inspection, the boiler mask is provided with an inspection hole. It is easy to open in front of the bowler, and staff can easily and clearly check the smoke box, which provides a good bet for proper handling.

4. Fully Explosed:

With secondary air and a proper furnace design, you can burn the oil completely and remove black smoke.

5. Proper grade:

Boiler Gate accepts two-sided ventilation, and dust removal technology naturally eliminates boiler alignment, avoiding air leakage, oil leakage, uneven ventilation, easier operation, and clearer advantages than ordinary gate. آهن.

6. The method of soil removal is simple:

The ash accumulation can be arranged with a hole in the drill hole, which allows the ash to be cut, to remove the ash, to avoid the operation troubles and to reduce the movement of the toes, to increase the load and load of the boiler. To ensure stability.

Technical Parameters

Note: the fuel consumption in the table is calculated on the basis of the low calorific value of biomass particles 17084KJ/Kg (4085Kcal/Kg). If the low calorific value of biomass fuel is larger than this value, the corresponding fuel consumption will be more economical than the value in the table.

External and Interface Dimension of SZL Biomass steam boiler

Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.

     It is one of the ten most famous towns in Zhongzhou, which is adjacent to National Highway 107 in the South and Beijing-Guangzhou Railway in the north. The company has the B-class boiler manufacturing license issued by the General Administration of Inspection and Quarantine of the State Quality Supervision Bureau and the D1 and D2-class pressure vessel manufacturing license. It is a comprehensive manufacturer of steam boilers, hot water boilers, heat carrier boilers, pressure vessels of Class I and II and auxiliary machines for various boilers. The company was founded in 1987.

     After relocation and expansion, it now has perfect production equipment and testing means, a high-quality staff and technical team, and has established and improved a set of quality assurance system. The quality policy of "quality-oriented, safety first, energy-saving, environmental protection, refinement" and "the pass rate of main parts inspection is over 95%, the pass rate of welding seam inspection is over 98%, the pass rate of product inspection is 100%, the pass rate of products manufactured is 100%, and the implementation rate of regulations and standards is 100%" have been formulated.

Product quality is safe and reliable, environmental protection and energy saving, and conforms to the national standards and industry standards. Pressure vessel products are inspected by the quality and technical supervision department and issued with product inspection certificate. 

Xinxiang Xinguo Container Manufacturing Co., Ltd. is willing to cooperate sincerely with friends from all walks of life to create brilliance!