Hot Biomass Briquette Fuel Boiler Industrial Biomass Chain Grate Steam Boiler

Hot Biomass Briquette Fuel Boiler Industrial biomass chain grate steam boiler

Introduction of biomass-fired steam boiler

1. The biomass steam boiler produced by the company is a square box type assembled forced circulation chain grate boiler. The biomass-fired steam boiler is lined up from the upper body and the lower furnace and can be assembled quickly at the user's site.

2. Our biomass steam boiler body has a square coiled tube on the heating surface, and boiler structure is a serpentine convection heat exchange tube. This structure is suitable for single furnaces and double furnaces.

3. According to the waste heat usage of the equipment, air preheater, steam waste heat equipment, and hot water economizer are arranged at the tail of the boiler for waste heat recovery. This structure can effectively reduce the exhaust gas temperature, improve boiler heat efficiency and reduce fuel consumption.

4. According to the fuel characteristics, the biomass steam boiler convection heat exchange section adopts measures such as high and low misalignment, widening of the spacing, and arrangement of soot blowing devices. This structure can reduce boiler ash and improve boiler thermal efficiency.

5. The biomass steam boiler body is made of high-quality insulation materials and special construction technology, and the insulation effect is good.

6. The biomass steam boiler is heated surface processing using a fully automatic gas shielded welding process, and X-ray inspection of all solder joints. Ensure that the welding quality is stable and reliable.

7. Small-scale biomass steam boiler is equipped with partial integration and on-site assembly. This type of integration is very high, and on-site installation is quick and easy.

Our biomass chain grate steam boiler product advantage

1. Strong recovery and reuse of waste heat, making the boiler more efficient, lower operating cost and more economical

2. The streamlined design makes the boiler structure more compact and the centralized arrangement of the chimney makes maintenance more convenient

3. Grade A qualification, regular manufacturers, reliable quality, ensure safe operation of boilers;

4. Discharge up to the national standards, reduce pollution to the environment, good environmental performance;

Biomass chain grate steam boiler Technology design:

1. The high furnace is easy to fully burn biomass fuel. According to the combustion characteristics of biomass fuel, design a reasonable furnace arch to improve fuel burnout and eliminate black smoke.

2, The use of high strength small chain grate, suitable for the transmission and combustion of biomass fuel, for large grate equipped with roller device, improve grate safety, combustion adjustment is convenient.

3, The unique high feeding, feeding device, to adapt to biomass briquette molding fuel, prevent the fire on the operation.

4, Reasonable arrangement of heating surface and combustion device, boiler thermal efficiency than the national standard 4~5 percent higher.

5, Reasonable smoke speed design, the heating surface does not accumulate ash, no wear, the boiler heating surface in the condition of no blowing ash, can maintain long-term efficient, full load, safe operation.

6, All independent circuit design, for the hot water boiler is also a reasonable ejection cycle, heating surface loop flow rate is higher than the national standards.

7, The furnace outlet smoke inertia separation, effectively reduce the concentration of exhaust smoke and dust and reduce the wear on the rear heating surface.

8, Compact structure, installation volume than the same capacity of other types of boilers, shorten the installation cycle and reduce the cost of boiler room.

10. Large water volume, good for power failure protection, and strong ability to adapt to load changes.

Description Of Biomass Briquette Fuel

Straw briquette Fuel (Biomass pellet or Biomass Moulding, Referred to as “BMF”) is to use of agriculture and forestry waste (such as straw, sawdust, bagasse, etc.) as raw material, after crushing, drying, mixing, extrusion process, such as molding made (such as granular, rod, block, etc).

Biomass Briquette Fuel Boiler is mainly used to replace the traditional fossil energy (coal, oil, natural gas), and it is a new clean fuel directly burned in the biomass burner specially developed.

Follow is biomass fuel comparison of each other

Yongxing Boiler Group Co., Ltd. is a group company specializing in research, development, manufacturing, sales and installation services for various boilers and various thermal energy machinery and equipment.

Yongxing Boiler occupies an area of 60,000m2, with fixed assets of 15 million dollars, and is used for more than 100 sets of large and medium-sized equipment for production. More than 60 sets of advanced equipment for product quality inspection, with 37 series. The boiler and pressure vessel contains 167 specifications and models.

With A-class boiler manufacturing license issued by the General Administration of Quality Supervision, Inspection and Quarantine

A1 and A2 pressure vessel manufacturing licenses

The first-class boiler installation and transformation license

The ISO9001 international quality system certification and so on.

Annual production capacity is over 2000 tons.

YONGXING boiler main product:

Coal fired steam boilers, oil/gas steam boiler,hot water boilers, Thermal oil heaters, hot air furnace, oil/gas burners,chain grate accessories, and other environmentally friendly boilers and pressure vessels .

All the equipment are strictly enforced by the state and Industry standard, reasonable product design, advanced production technology, technical content in the country's similar products in a leading position, with compact structure, low noise, high thermal efficiency, safe and reliable operation, high degree of automation, etc.

All environmental indicators are in line with the national class I regional environmental protection standards require excellent products recommended by the environmental protection department.

Our company holds A-class boiler manufacturing qualification, A1, A2 pressure vessel manufacturing qualification and mechanical and electrical equipment installation engineering professional contracting qualification, and passed the international ISO9001 2000 quality management system certification.

Our company strictly follows the ISO9001 international quality management system guarantee model, carries out quality management and quality inspection and control activities, and the product quality is stable. It was rated as “Contract-honoring and Promise-keeping Enterprise” by the Henan Provincial Administration of Industry and Commerce, “National Honest and Law-abiding Enterprise” by the Ministry of Agriculture, and was included in the member unit by the China Quality and Technical Supervision Association, and has obtained a number of patented technologies.

Company honor: