Anti-corrosive Stainless Steel Pole Power Transmission Poles Electrical Power Pole

Product Description:

The HDG power transmission poles was designed as customer's request. For Distribution and Transmission Line use. And with Base Plate use Anchor Bolts to Install. Sections with 2 and use flange to connect each segment. The hot dip galvanized in accordance with ASTM 123 and the zinc coating at least 86 microns.

But to design the practical poles for customers use, normally we need customer to provide us some parameter, like as the followings :

- Pole top design load
- Where is the position of the load, the distance from the top
- The wind Speed
- How will the wire distribute
- Pole type with Burial Type or Base Plate type
- The connections mode, use slip joint or flange
- and others can be furthermore discussed when needed.

Product Specification:

Product Advantages:

The hot dip galvanized power transmission poles plays an important role in electrical power transmission and distribution industry. In order to meet the increasingly higher demand for steel tubular pole, our company design and produce many kinds of steel tubular pole for the power transmission and distribution system. Besides, our electrical steel tubular pole have been tested and approved by the Transmission Pole Tower Testing Station.

As an alternative to the traditional wood and concrete poles, our hot dip galvanized steel tubular pole could be utilize to bear the conductors and electric distribution equipment, power transmission equipment, cables, etc.

our company has more than 15 years' design & manufacture experence which enable us to handle volume orders with high quality and low cost. In order to provide better service for customers, we promise to reply within 24 Working Hours and technical support by E-mail and calling service."

Application Scope:

Power transmission poles mainly use between high voltage transmission lines, with lightning rod hanging place on top, bolt connecting tower body with cross arm which has wires hanging place. The intersecting surface of tower is oblong, and the intersection surface macroaxis of tower and cross arm is 0 to 90 degree angle. In practical application, raw material can be saved of shorten the circumference of intersection surface by bearing the max bending moment of oblong intersection surface macroaxis.

Packaging&Shipping:

* Covered by Plastic Wrap or Mat or according to client's requests.
* The Loading Pcs of Each Container could be calculated according to client's specification and data.





Company Information:
JIANGSU HONGGUANG STEEL POLE CO., LTD.
With over 15 Years of Experience/ Capable to Handle Volume Orders
Exporting to Southeast Asia, Africa, Europe, Austrlia, the Middle East, South America, etc.
Founded in 1998, Jiangsu Hongguang Steel Pole Co. Ltd (JSHG) specializes in manufacturing various structures. We manufacture a variety of products like structure and Substation Structure for the power transmission industry; high masts and street lighting poles for illumination, which are widely used in expressways, airports, ports and docks, depots, parking lots and stadiums; tower poles for funicular railways; Telcommunication poles for the telecommunication industry; Traffic Poles & Camera Poles & Sign Structures for transportation Industry and Advertising Industry.

Engineering and Design Management

“Design and technology,professional and common, software and hardware” is JSHG‘s electric post design philosophy. We have established a close cooperative relationship with design institutions and companies in the same industry. Through close communication and explorations, our company took in advanced design concept, introducing domestic and foreign first-class design software, and attracting high-quality personnel.

In the R&D Department, there are many experienced senior research & design staff and rigid development network, which ensure our design proposals meet customer demand, even exceed their expectations.

Since the establishment, JSHG have put forward thousands of design proposals covering several industries and fields, such as power transmission industry, telecommunication industry, lighting industry, etc, which provides complete and strong technical support and service assurance.

Contact Us:

Jiangsu Hongguang Steel Pole Co., Ltd.
Address: Wanshi Industrial Zone, Yixing City, Jiangsu Pro., P.R.China, 214212
Telphone: +86 510 878 441 56
Fax: +86 510 878 435 28
Trade manager ID: cnhgsteelpole
Skype: tangjia870124

Please feel free to contact us!

With over 17 Years of Experience
Founded in 1998, Jiangsu Hongguang Steel Pole Co. Ltd (JSHG) specializes in manufacturing various steel poles. We manufacture a variety of products like transmission steel towers & poles and substation structures for the power transmission industry, high masts and street lighting poles for illumination, which are widely used in expressways, airports, ports and docks, depots, parking lots and stadiums, tower poles for funicular railways, microwave communication poles for the telecommunication industry, aero-generator supporting poles and street lighting poles.

Capable to Handle Volume Orders
Our company covers an area of 65,000 square meters, with a registered capital of $10.1 million. With 45,000 square meters of production space and more than 200 staff, we have the capacity to meet the needs of even the largest projects. We have rich engineering resources, strong manufacturing capabilities, attentive customer service team, project management staff and financial strength, to ensure uncompromising quality and the success of your project. 
 
We have the ability to make 30,000MT of steel poles annually. We own two 2,400T and 600T large-scale hydraulic bending machines, each of which is able to produce large-scale components and pole structures. Besides, our company has other advanced equipment, such as CNC flame cutting machines, automatic slitting-welding machines, plate-flatted machines, clippers, automatic-closed up machines, automatic submerged arc welding machines, automatic levelers, automatic spayed pipelining and fine machining auxiliary machines.
 
Adhering to ISO 9001, ISO 14001 and OHSAS 18001 Regulations
In addition, we have set up the everlasting policy and target of quality control, which have been implemented strictly by all employees. We passed and comply with the three-system of ISO 9001, ISO 14001, OHSAS 18001 and set relevant regulations from raw material sourcing to design, production, daily management and after-sales service. At JSHG, quality is not a simple word, it is our commitment. We are dedicated to meeting and exceeding all your requirements, and providing the highest quality, cost-effective solution to meet both your budget and schedule.

 
Comprehensive and Famouse Clinets
With the efforts of all staff as well as external support and cooperation, our products are sold well in China and overseas markets. Our markets cover Philippines, Russia, Australia, New Zealand, England, Malaysia, Bangladesh, Pakistan, Ghana, Liberia, Angola, Nigeria, Congo and so on. Moreover, we are partnered with many famous companies, such as SGCC, NGCP, BPDB, ESKOM, China Unicom, China Mobile, TEBA, ZTE, CU Lighting(UK), COSLEE Australia,  Abacus Lighting, etc.
 

Receiving Our Excellent, Quick Response to Project Modifications
When you place an order with us, we design and fabricate tubular steel structures with your needs in mind. Built with a commitment to customer service, we understand that your project is important, and that timely delivery is essential. We also know that there are changes needed to be made during a project. Our team enables us to respond quickly to project modifications while maintaining your project schedule.