1Khz-hz Ultrasonic Impedance Analyzer For Sonotrode Sound Measuring Instrument

Specification:

Description:

The impedance analyzer can be measured and rated to match the circuit.
Whether the design, processing and assembly of the horn are reasonable or defective can be seen directly on the circular diagram.

The impedance-phase-frequency curve and admittance circle of a normal product are shown in the following figure:

But not all of the device's graphics are as shown above. Here are the graphics for several problematic devices:

Scope of application:

All ultrasonic equipment that uses ultrasound
Electrical equipment, electronic components, etc.

Advantage:

● Easy to use, accurate and inexpensive, measurement accurace is extremely high
● Judging product defects by admittance circle and logarithmic curve at a glance
● Test data can be stored and printed on the computer, and the data can be traced back to the source.
● Printable impedance scan curve graphics for easy sample analysis and archiving
● One-click start test function, easy to operate, high production efficiency

Measuring:

(Note: There are differences in the relevant characteristic data of different manufacturers)

Measurement parameters: |Z|, |Y|, θ, R, X, G, B, L, C, D, Q can provide 12 parameter combinations

Test frequency: 100Hz~40MHz (cable length: 0m)

Vibrator level: 10mV~1Vrms (≤10MHz), 10mV~0.5Vrms (>10MHz); (UNKNOWN open), 3-bit resolution

DC offset: 0~±40V, 10mV resolution

Measurement terminal: 4-terminal configuration

Measuring range and highest resolution

Measurement parameter range maximum resolution

Basic measurement accuracy: 0.17 [%]

Level monitoring: 1mV~1 Vrms, 1μA~20mA

Gain-phase measurement

Measurement parameters: Tch/Rch (dB, linear ratio); Tch, Rch (V, dBm, dBv), θ (degrees, radians); Tch = measurement channel: Rch = reference channel, g = group delay

10Hz~100MHz, 1mHz resolution

Aperture frequency range: (group delay measurement) frequency interval 0.5 [%] ~ 100 [%]

Oscillator level: -65dBm~+15dBm, 0.1dB resolution

Measurement range: Tch/Rch: 0~±120dB, 0.001dB resolution; Tch, Rch: -107dBm~-5dBm (0dB attenuator), -87dBm~+15dBm, (20dB attenuator); 0.001dB, resolution: θ: ±180° (using phase scale extension function, continuous display of phase) 0.01° resolution; g: 0.1 ns~1 s, 0.1 ns resolution

Basic measurement accuracy: Tch/Rch: 0.1dB, 0.5°; Tch, Rch: 0.35dBm

Level Monitoring: Monitors the input level of the reference and test channels in dBm, dBV and V.

Workshop:


CE Certification:

Packing&Shipping:




Payment:

Hangzhou Altrasonic Technology Co., Ltd

Located in Hangzhou, China, was found in 2010. Altrasonic has many years' experiences in the business of industrial ultrasonic components and ultrasonic devices in China. We use this experience and experise to provide only the best ultrasonic devices and components based on the competitive price.

Altrasonic equipment focused on the r&d of high power ultrasound applications, Altrasonic has absolute leading 
core technology, the most stable and mature manufacturing technology, rich experience, can provide direct 
ultrasonic application scheme demonstrate, structure design, system configuration and related parts production.

Altrasonic equipment cooperated with the key graphene manufacturers, applied the ultrasound equipment in 
graphene preparation process of industrialization firstly, and make the ultrasonic be a good supporting to the large-scale preparation of the high quality and low cost graphene materials. 

Our company mission:Ultrasonic Technology makes life easier.

WHY CHOOSE ALTRASONIC ?

• OVERSEA SERVICE TEAM. We now have agents in India, Austrilia, Indonesia, Singapore, Türkiye, Malaysia,  Germany, and other country still being discussing.

• Innovation. Altrasonic R&D and marketing staffs to constantly explore new applications in the field of ultrasound,  and the importance of team spirit of cooperation.

• Half the price, double the value. Every product reach you have been test in our company three times, and with  72 hours continous working, to confirm it is well before you get it. Also we always learn from foreign company, to 
 upgrade our products.

• Good components. Ceramic mainly imported from German, and using the superior quality aluminum, titanium raw materials.

• Individual Customize. We can customize products according to your requirements, Also supply OEM service. 

 Customize ultrasonic solution for different applications.