PLC Control Oil Burner Hot Water Heater Convenient Leakage Protection Multipurpose

ISO standard boiler manufacture Hot Oil Boiler

Boilers of YY (Q) W series, also known as organic heat boilers, use oil and gas as fuel, heat oil as medium, through hot oil in circulation pump forced medium liquid cycle, transfer heat energy to use heating equipment, return to the furnace for heating and then heat e at heat wave, the achieved heat may meet the requirements of the boiler. Its heat temperature can reach 320 in liquid phase or 400 in vapour phase.

The heat surface of the boiler is compact in structure. The heat surface consists of internal, intermediate, external (or internal, external) circular broadbands placed in close rows. The internal broadband absorbs most of the heat from the radiator surface and the high temperature of the flue gas penetrates the convective heat surface.

Product Features

1. Easy to install:

The cauldrons are usually divided into upper and lower parts, which is convenient for transport and installation on site, shortens the installation cycle a lot, saves installation costs, and allows the caldeir a to be put into operation in time.

2. Reliable operation:

The heating surface of the Caldeira is reasonably organized and the circulation of the hot oil is smooth, which ensures timely cooling of the heating furnaces and safe operation of the Caldeira.

3. Easy maintenance:

The Caldeira is equipped with multiple inspection holes, the inspection of maintenance personnel is convenient and Clara, which provides good conditions for proper operation.

4. Combustion complete:

The fireplace is high, the fuel can be completely burnt, under the cooperation of secondary air, can effectively remove Black Smoke.

5. High efficiency grade:

Caldeira's Grill adopts two -sided ventilation, which brings ash to the Front of the Grid E discharges it. Avoids air leaks, oil leaks and uneven ventilation. It is easy to operate and has many advantages MS compared to traditional grid.

6. Easy to remove Ashes:

The installation of soot blower In the convective heat transfer zone of Caldeira Can remove soot quickly and effectively, avoid the influence of soot accumulation on on Caldeira operation or reduce thermal efficiency, and ensure cargo stability The kettle.

Technical Parameters

Note: the fuel consumption in the table is based on light oil low calorific value 42915KJ/Kg (10260Kcal/Kg), natural gas low calorific value 35588KJ/NM3 (8500Kcal/NM3) and liquefied gas low calorific value 45998KJ/Kg (11000Kcal/Kg). Calculation of low calorific value (16750KJ/NM3 (4000Kcal/NM3) of urban gas.

Remarks: We will reserve rights to change the above mentioned data due to continuous policy transformation and product improvement.