Explosion Proof Sawdust Removal System With Cartridge Dust Collector 3020X2150X3520

Explosion Proof Sawdust Removal System With Cartridge Dust Collector 3020X2150X3520

CDC Downward Flow Cartridge Dust Collectors

Tips

Use the Right Parts

Make sure your dust collector system is using the right parts, from the blower, dust filter, a filter-cleaning system, dust receptacle or dust removal system, to cartridges and baghouse solenoids, fans and valves. Each part plays a role to ensure the collector is operating at design point. We recommend using factory recommended replacement parts and be leery of less expensive alternatives.

Is Your Hopper Free of Dust?
A duct collector’s hopper should never be used to store dust. The hopper is intended to funnel process dust to a storage bin. Dust accumulating in a hopper creates a potential fire or deflagration risk. Dust in your hopper will also clog the system and diminish the collector’s performance and prevent the pulse-cleaning from doing its job.

Check Diaphragm Valves
It’s smart to make checking your diaphragm valves a priority each year. Particularly when new baghouses or cartridges are installed, it is recommended to check the valves and ensure that all filters are cleaned properly from the beginning. Remember that it’s always cheaper to replace diaphragm valves that it is to buy new filters because of inadequate pulsing. (Remember to wear appropriate ear protection when testing pulse valves as the noise level can rise considerably.)

Regularly Check Your Ductwork

The National Fire Protection Association requires protection for the ductwork and safety processes upstream of the dust collector. It’s smart to equip your ducting with a flow-activated isolation valve protecting downstream work areas from the propagation of flame and pressure through the inlet duct when deflagration occurs in a dust collector. If there is deflagration in a dust collector, the pressure will close the valve preventing the passage of flame and smoke to areas upstream from the valve. The valve latches shut and must be reopened manually. Some parts of the valve may be damaged, and a thorough inspection is required before the valve is back in service.

Auzoer is established as one of the manufacturers in the Air Pollution Control industry for more than 15 years. Our experience covers all facets of Dust, Mist, Fume and Industrial Ventilation Control systems for general industrial applications.

We have cartridge dust collector,baghouse dust collector,welding fume extractor,plate sintered dust collector and powder conveying equipments.

Auzoer specializes in production of dust collectors for a variety of applications that include: pharmaceutical, metal grinding, wood working, composites, buffing and polishing, blasting, welding fume, chemical mixing and processing (wet or dry).

We have experienced designers and apply PDM/ERP/CRM to follow up the projects and orders which assured all the procedures controlled.Through the air flow simulation shell strength is optimized to ensure the efficient and safe operation of the dust collectors.

Our Location is Zhangjiagang City of Suzhou,about two and half hours driving to Shanghai International Airport.