Europe Standard Waste Light Oil Burner For Industrial Boiler Environment Protecting

Europe standard waste oil burner for industrial boiler with best price

A waste oil burner is a common industrial device that uses chemical combustion to convert fuel into heat. The waste oil burner generally consists of a burner casing, a program controller, a fan, an oil pump, a servo motor, an electric eye, a solenoid valve, a combustion head, and the like. It is fuel. Important auxiliary equipment for gas boilers is also widely used in technical heat treatment, drying, baking, drying, incineration and other related fields.

The working process can be briefly described as follows: After starting up, the program controller outputs a current signal and the fan starts running. The servo motor drives the damper to perform pre-blowing. After completion, the servo motor drives the damper back to the ignition position. At this point, the ignition transformer starts to output a high-voltage ignition action, and the solenoid valve is simultaneously opened. If the ignition is successful, the program controller will adjust the load according to the heat demand. If the ignition fails, the program will issue a prompt to prepare for the next start.

Waste oil burner features:
1. Waste oil burner
2. Single stage operation (on/off)
3. High pressure mechanical atomisation of fuel using nozzle.
4. Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
5. Manual flow adjustment.
6. One flange and one insulating seal for boiler fastening.
7. Combustion air intake with flow adjustment device.
8. Sliding boiler coupling flange to adapt to head protrusion of the various types of boilers.
9. Adjustable blast-pipe with stainless steel nozzle and deflector disk in steel.
10. Mono-phase electric motor to run fan and pump.
11. Flame pressure check by photo-resistance.
12. Electrical plant protection rating lp40.

Waste oil burner structural features:
1. The waste oil burner is a self-contained structure. The motor drives the blower impeller and the oil pump through the same shaft. All adjustment devices are visible and easy to operate.
2. The flame of the burner can be completed by adjusting the amount of oil and the amount of wind;
3. The waste oil burner flame adjustment mode includes two modes: sliding adjustment and proportional adjustment;
4. The waste oil burner controller can control the autonomous operation of the equipment and monitor the flame;
5. The waste oil burner's special structural design can be operated in an indoor environment of -10 ° C —40 ° C.

Waste oil burner data sheet.

Waste oil burner manufacturers with famous part ,long life time:
SIEMENS CONTROLLER
DUNGS VALVE
DANFOSS NOZZLE
SUNTEC OIL PUMP
BRAHMA/PARKER SOLENOID VALVE
FIDA TRANSFERMA
SIEMENS SERVOMOTOR

Yongxing Boiler Group Co., Ltd. is a group company specializing in research, development, manufacturing, sales and installation services for various boilers and various thermal energy machinery and equipment.

Yongxing Boiler occupies an area of 60,000m2, with fixed assets of 15 million dollars, and is used for more than 100 sets of large and medium-sized equipment for production. More than 60 sets of advanced equipment for product quality inspection, with 37 series. The boiler and pressure vessel contains 167 specifications and models.

With A-class boiler manufacturing license issued by the General Administration of Quality Supervision, Inspection and Quarantine

A1 and A2 pressure vessel manufacturing licenses

The first-class boiler installation and transformation license

The ISO9001 international quality system certification and so on.

Annual production capacity is over 2000 tons.

YONGXING boiler main product:

Coal fired steam boilers, oil/gas steam boiler,hot water boilers, Thermal oil heaters, hot air furnace, oil/gas burners,chain grate accessories, and other environmentally friendly boilers and pressure vessels .

All the equipment are strictly enforced by the state and Industry standard, reasonable product design, advanced production technology, technical content in the country's similar products in a leading position, with compact structure, low noise, high thermal efficiency, safe and reliable operation, high degree of automation, etc.

All environmental indicators are in line with the national class I regional environmental protection standards require excellent products recommended by the environmental protection department.

Our company holds A-class boiler manufacturing qualification, A1, A2 pressure vessel manufacturing qualification and mechanical and electrical equipment installation engineering professional contracting qualification, and passed the international ISO9001 2000 quality management system certification.

Our company strictly follows the ISO9001 international quality management system guarantee model, carries out quality management and quality inspection and control activities, and the product quality is stable. It was rated as “Contract-honoring and Promise-keeping Enterprise” by the Henan Provincial Administration of Industry and Commerce, “National Honest and Law-abiding Enterprise” by the Ministry of Agriculture, and was included in the member unit by the China Quality and Technical Supervision Association, and has obtained a number of patented technologies.

Company honor: