Silvery Multi Cavity Mold 3Cr17 3Cr17MoNiV Material Stable Discharging

Product/Mold Description

A constant temperature profile from the exit of the extruder to the
exit of the die helps keep the material flowing at the same velocity
throughout the die, and across the entire flow path from the outside
surface to the inner surface. The key is to avoid gaps in heat coverage.
When temperatures are high and extrusion dies are not fully covered by
a heater, deterioration of the flow path can occur. Variances in temperature
can cause the material to get hung up on the “cooler” spots, leading to
variations in wall thickness. This causes defects, rejects and lost revenue,
because the cost of the excess material used cannot be recovered.

1) Mould for imitation marble line, door line and waterbar;
2) Mould for PVC+ wood powder surface crusting foaming profile;
3) Mould forPE/PP+ wood powder, PE co-extrusion (rice bran powder, saw dust, wheat strawetc.);
4) Mould for PVC low foaming profile, co-extrusion mould for PVC foamdecoration profile;
5) Mould for hard PVC door, door panels;
6) Profile moulds ofcolor co-extrusion and soft-hard co-extrusion ;
7) Co-extrusion moulds forsteel-plastic and aluminum-plastic composite;
8) Colors co-extrusion moulds ofboard, wire duct.
9) Mould for PVC quick assembling wallboard.

Mold Show

Advantage:

1.We have rich and professional experience in PVC and WPC mould production.

2.Zhuoran is the first factory which can design and produce stone plastic imitation marble line.Our team is young and creative.we have enough energy and ability to design and produce new product.

3.OEM service.We can offer you customized product as your sample or drawing design

4.Competitive price. Best quality. Delivery in time. Prefect service

5.We can not only offer you our best mould,but also provide service and technology.

6.24-hour service. We will keep 24-hour on line.You can contact with us in any tim

FAQ:

Q: Are you trading company or manufacturer ?

A: We are the most rich experience and professional pe,pvc and wpc extrusion mould factory in china.

Q: What is your delivery time?

A: Generally speaking,15-40 days after receiving the deposit and confirm the order and all details.

Q: What is your terms of payment ?

A: T/T is our main payment, If you want to pay by other payment.we can negotiate.

Q: What is your main market?

A: Our market spread all over the world.But our main market still now is in Middle east,Ukraine,Italy Russia and so on.

Q: How can you ensure the quality of mould:

A: We will test the mould before shippment.if you still worried about the quality,you can send us the material formula or examine the mould to our factory.

Ningbo Alever Electronic Technology Co., Ltd is founded at 2018, used to be Ningbo FangDi Technology Co., Ltd, founded at 2003, focus on mold production for over 15 years, registered capital 5M RMB, now Alever is founded as a unit company which have ability of mold design, mold frame manufacture, mold frame machining, mold production, and OEM service and trade for home appliances.

During this 15 years time, Alever always follow a one signal rule which is customer first, start from a small mold machining center, now successfully turn to a group which use trade as arm, service as heart, providing a complete supplier chain service from component mold design, mold production, manufacture and purchase of plastics part, die-casting part, until the final assembly of the good, meanwhile, Alever has founded a RD center, a sales center, invested a mold frame factory, in order to improve the product quality since the very beginning, also we can provide to customer more possibility and different kinds of service.

Just because of our focus at customer service, we keep moving at last 15 years, and our annual sales get a 30% per year from last 5 years, annual capacity grows to 15 million USD, in future, we believe, be prepared all the time, and get any chance which is possible, we can take it as a point and goes to a bright new tomorrow.

A Lever, A World!