Flanged Hydraulic Control Valve , Cast Steel Slow Shut Off Check Valve

Hydraulic Slow Shut Off Check Valve , Cast Steel , PN 25 Bar , Flange

PRODUCT INTRODUCTION

1. Description

The 300X slow shut-off check valves is an intelligent valves intended for installation in the pump outlet of a high-rise buildings' water supply system. When uses it effectively prevents the reverse flow of a medium, as well as water hammer-type phenomena. This valves utilizes a motorized valves, check valves and water hammer eliminator at the same time and can effectively increase the safety and reliability of a water supply system.It integrates such functions as slow opening, fast and slow closing in order to eliminate water hammer, so as to prevent the occurrence of pump-on water hammer and pump-off water hammer. The valves can automatically realize turning on/off according to the operation specification of the pump.By pressing the On/Off button of the pump motor; a large flow and small pressure loss can be achieved. Our slow shut-off check valves are suitable for use with pipes of 600 caliber and below.

Pressure Rating: PN10. PN16. PN25/Class150

Size Range: DN20mm-DN800mm (3/4" - 32")

Test and inspection: GB/T 13927

2. Application

The valves is used at outlet pipe of pump, with its open & close speed adjustable, and also used at high building for reducing water hammer & water slamming.

3. Specification

4. Hydraulic Control Valve Outsize Drawing

If you require other sizes and valve design standards, please send email to angela@tjfmcn.com to get the drawing.

Please feel free to contact with us at angela@tjfmcn.com or filling up an enquiry form instructed at the bottom.

You will get an effective response within 24 hours from TongJiang Team.

CONTACT INFORMATION

Miss Angela

Mobile: +86 13588429004(Whatsapp)

Skype: angelazhuo1

E-mail: angela@tjfmcn.com

Tel No: +86 571 86991717

Official Website: www.zjtjvalve.com

TongJiang Holdings Company was established in 1993 and focuses on the research and development of all kinds of medium and low pressure valve and the groove pipe fittings.For this 26 years development, TongJiang Holdings has been the famous and professional valve production manufacture inChina.

In 2012, the company costed more than 5,000,000 USD to build 20000 M2 modern equipment factory in DEQING, HUZHOU, ZHENGJIANG. Company annual sales is more than 500 hundred million USD. Also factory has more than 100 employees, including more than 10 professional and technical personnel.

TongJiang sells the valve and pipe fitting for European, Asia, Middle East, American countries.

TongJiang introduces a full set leading of production equipment, which is from raw materials to processing plant, including the valve forming, groove, product testing and factory sales. All the production process adopts information automation control.

TongJiang Company also strictly concatenates on the quality control. The product is passed the ISO9001 quality system standard certification and national standards.