Small Industrial NdFeB Permanent Magnet / Sintered Ndfeb Magnet Silver Coating

NdFeB Permanent Magnet

Products details:

➤Multi-Use Magnets :

.Fridge magnets

.Whiteboard magnets

.DIY, map magnets,Hang key

.Science projects, office magnets

.Art and crafts

.Organize to-do lists..........

➤High Quality:

Smooth,Shiny,Corrosion Resistant Surface

➤WARNING :

KEEP AWAY FROM ALL CHILDREN. Do not swallow or place into mouth or nose. Also keep away from heart pacemaker

BE CAUTIOUS NOT TO COLLIDE THEM FIERCELY. Throw away when broke.

NdFeB Permanent Magnet production process:

Neodymium magnets are actually composed of neodymium, iron and boron (they are also referred to as NIB or NdFeB magnets). The powdered mixture is pressed under great pressure into molds. The material is then sintered (heated under a vacuum), cooled, and then ground or sliced into the desired shape. Coatings are then applied if required. Finally, the blank magnets are magnetized by exposing them to a very powerful magnetic field in excess of 30 KOe.

Key Advantages of Neodymium Magnet:

• Neodymium Magnet are the most powerful commercially produced magnets.
• Neodymium Magnet have a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 50 MGOe.
• Neodymium Magnet can replace SmCo magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade.
• Neodymium Magnet has very high strength.
• Relatively low cost.
• Compared to Alnico and SmCo magnets, relatively easy to machine

[Access Information]
For magnets that have good magnetic properties and are relatively strong, hold the entire magnet with your left hand. Hold your right hand with your index finger and thumb. Move the magnet horizontally. Do not throw the removed magnet back into the magnet stack immediately after removal. Isolation of the magnet immediately. Gently, away from iron or magnetic objects (about 16 cm) or use a paper bag to take out the paper for safer. If you need to put the magnet back into the entire magnet, slowly return it to its original position and remove it from the near edge. The hand must hold the magnet until the magnet moves in.

Physical properties

     Yuyao Hongwei Magnetic Technology Co., Ltd.is located in Yuyao City, Zhejiang .Set up in 1995,it specializes in manufacturing NdFeB magnet,in eight years, through efforts by all members of our company,by renewing our developed equipment,completing manufacture technology and improve our products’ quality and capacities,pur annual turn-out reaches 300 tons,The company has passed the ISO9001 quality control system authentication.there are N35-N50, N33H-N48H, N33SH-N45SH, N27UH-N42UH, N27EH-N38EH series,and specifications form outside diameters Φ1.5-Φ180,inner diameters Φ1-Φ95,diamond 150×150×100,and we also process all kinds of products such as tilet,rapexia,diamond, ringy, sphericity and abnormity according to customer’s request. With advanced and completed process capacity,we can satisfy customer’s needs,products have been exported to America,Canada,Italy ,Singapore,Japan,Taiwan,Hongkong etc.and was recognized by customers,According to market’s needs,we have set up magnetic loop workshop,annual output reaches 3 million sets,and can design according to customer’s request.

     We also provide permanent magnetic ferrite lump and plastic magnetic slice to satisfy customers.We believe that quality,service credit standing are the premise of cooperation to friends both from home and abroad.