SA423/A423M Electric Welded Low Alloy Steel Tubes

SA423/A423M Grade 1 , Grade 2 , Grade 3 electric welded steel pipe , Electric-Welded Low-Alloy Steel Tubes

Standard Specification for

Seamless and Electric-Welded Low-Alloy Steel Tubes1

1. Scope

1.1 This specification2 covers minimum-wall-thickness, seamless and electric-resistance welded, low-alloy steel tubes

for pressure containing parts such as economizers or other applications where corrosion resistance is important.

1.2 The tubing sizes and thicknesses usually furnished to this specification are 1⁄2 to 5 in. [12.7 to 127 mm] in outside

diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm] inclusive, in minimum wall thickness. Tubing having other dimensions may

be furnished, provided such tubes comply with all other requirements of this specification.

1.3 Mechanical property requirements do not apply to tubing smaller than 1⁄4 in. [3.2 mm] in inside diameter or 0.015

in. [0.4 mm] in thickness.

1.4 An optional supplementary requirement is provided and, when desired, shall be so stated in the order.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the

SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system

shall be used independently of the other. Combining values from the two systems may result in non-conformance with the

standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

2. Referenced Documents

2.1 ASTM Standards:3

A450/A450M Specification for General Requirements for Carbon and Low Alloy Steel Tubes

E213 Practice for Ultrasonic Testing of Metal Pipe and tubing

E273 Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

8. Tensile Requirements

8.1 The material shall conform to the requirements as to tensile properties prescribed in Table 3.

9. Hardness Requirements

9.1 The tubes shall have a hardness number not exceeding 170 HB or 87 HRB.

10. Forming Operations

10.1 Tubes when inserted in the boiler shall stand expanding and beading without showing cracks or flaws.

FAQ:
1. Can you provide a sample to check the quality?
We can provide free sample with same or similar sizes for you to check tube quality.
You need to in charge of Express costs.
2. How about your production capacity?
3000 tons/Month.
3. What are your terms of payment?
30%TT in advance, Balance to be paid before shipment.
4. Where is your factory?
Jiaxing city, 2 hours away from Shanghai.
5. How can I get the quotation A.S.A.P?
Please send us an inquiry with full details as following,quotation will sent to you A.S.A.P:
1). Tube Standard
2). Steel Grade
3). Tube Size and Size Tolerance
4). Tube length
5). Quantity
6). If any special requirements
6. How about the minimum order quantity?
Normally for one size above 1 ton.
Welcome to contact us! Thanks.