Stamping Process High Speed Feeder Material Rack Leveling Roll Feeder Machine

The material rack is a process equipment for placing and unwinding raw material rolls in press processing.

When the traditional heavy-duty coil is unrolled, the stamping owner uses a simple material frame, which is very simple in structure, consisting of an iron rod that can carry the weight of the material roll and a shelf for holding the iron rod at both ends.

When the simple material frame is used, it needs to rely on the tension transmission of the follow-up machine (leveling machine, feeder). Although it can also perform automatic unwinding, there are three obvious shortcomings:

1. This simple material frame itself has no power, which requires the follow-up machine (leveling machine, feeder) to have greater traction, and the thickness of the material should not be too thin, the thin material will be pulled when pulling The material itself causes a lot of damage.

2, this simple material frame, the inner diameter of the coil is uncontrollable, there are certain variables, can not be well fitted with the iron bar of the material frame, resulting in the smooth rotation of the coil during the process of turning and unwinding, to produce bring inconvenience.

3. In the case of a small amount of residual material, the inner diameter of the coil will gradually expand as the residual material decreases, which will make the material rack unable to drive the coil to feed.

The emergence of heavy-duty material racks is a heavy-duty unloading and unwinding device that was born to replace this simple material rack.

By rotating the carrier handle in a smooth and counterclockwise manner, the four trays and the inner diameter of the coil are completely attached and positioned by the position of the material A-type iron.

It fundamentally solves the problem of unsteady fit and unwinding. At the same time, the heavy-duty material rack itself has its own power system, and it is controlled by the sensor rack. It is not only easy to operate (only simple setting on the material rack) .

And in the true sense of automation, the custom-made heavy-duty material rack has an unparalleled advantage over the traditional simple material rack.

Its inner diameter, outer diameter, load capacity and expansion mode can be tailored to the actual needs of customers, and truly meet the needs of customers for diversified production.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.