Ship Mooring Bumper Pneuamtic Rubber Fenders High Strength Sling Type

Marine Docking 0.7m x 1.5m Ship Mooring Bumper Pneumatic Fender

Pneumatic rubber fender is a bumper that make compressed air as media. Impact energy absorbed by compressed air so that the ship can berth softly to protect the ship from compacting.The fender is featured with high strength,friction resistance, high energy absorption and low force reaction.

The advantages of pneumatic rubber fender

A. Using reinforced synthetic tire cord layers

B. No mold vulcanization and attach surrounding molding process

C. High energy absorption and low reaction force

D. Good adaptability to tilt in ships connection.

E. Floating on the surface of the water, suitable for ship swaying.

Structure characteristics

Pneumatic Rubber Fenders made of an outer rubber, reinforcement synthetic-tyre-cord layers, and inner rubber layer, vulcanized firmly.

A]. the outer rubbers are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.

B]. the reinforcement synthetic-tyre-cord layers are strong enough to maintain the internal air pressure of the fender.

C]. the inner rubber layer seals the pressurized air inside the fender.

D]. fenders equipped with safety valve for releasing excess internal pressure when the fenders are over compressed accidentally.

Fender assembly for the end of metal, by inside and outside the two flanges with bolts, nut clamping, center is a valve, its structure is similar to automobile tire valve.

From July 1^st ,2002, Luhang setted standard of <Qingdao Luhang Marine Airbag and Fender Factory Standard Lifting and Weight Loading Airbag > and from July 1^st, 2004, we setted standard of <Qingdao Luhang Marine Airbag and Fender Factory Standard of Pneumatic Rubber Fender>The performance of our products exceeds China standards and Industry Standards.

Initially established as Qingdao Luhang Marine Airbag Factory in 1988 and changed to Qingdao Luhang Marine Airbags and Fenders Co.,Ltd in 2011, Qingdao Luhang had been devoted itself to developing and manufacturing marine airbags and marine fenders for more than 2 decades.

The factory area is 56,000m² with building area of  21,000m². The company has registered capital of USD 3 million and fixed asset of USD1.2 billion. We have a full line of production equipment: rubber mixing machine, rubber roller machine, the China biggest vulcanization tanks, the biggest Press Inspection Machine, EVA foam processing machine, Foam shaping machines and SPUA spraying machine.

Through these years' development, we have full range of marine airbags and marine fenders:

Ship Launching Airbags for ship launching and docking in shipyards

Marine Salvage Airbags for salvaging sinked vessels or refloating objects from under water

Other Airbags for special usage

Pneumatic Rubber Marine Fenders for ships and docks berthing

Foam Filled Marine Fenders for ship and docks berthing

Fixed Dock Rubber Fenders for docks and wharfs

Marine Buoys

From the begginning we have been focusing on technological innovation. With a team of experienced technicans and engineers, we have developed some high tech marine products and got some petents. We have been approved as a supplier of Navy products. 

Quality is our life line. We provide service of “three guarantees” (returning, repairing and replacing) on all our products in case of any defects due to the problems of material,manufacturing, performance under conditions of normal operation and maintenance.