Vacuum Former Dental Lab Technician Equipment Oral Therapy Energy Saving Mute

Intelligentize Dental Lab Equipment Denture Vacuum Former Energy Saving Mute

The Vacuum Forming Machine is a kind of equipment which can be used in the Department of Stomatology to form a wariety of functional plastic diaphragms. It is a Full-automatic forming equipment and it can save time and protect the operator. The vacuum forming machine adopts the built-in vacuum pump, the users just have to connect the power and it can start the hot pressure molding operation without an external gas source. It adopts push-button operation mode and the built-in molding parameter mode is set for the users to choose.

This portable Vacuum Forming Machine is specially designed for dental applications. Its powerful vacuum
motor provides immediate suction, surely creates accurate materials. Quick and easy vacuum forming for mouth guards, custom trays, base plates, temporary splints, bruxism splints, and copings. It’s the necessary dental equipments. This machine will with stand years of rigorous use.

Operation Instruction

1) Connect the machine with power 110V/60Hz, check the status of vacuum motor (⑪) and electric heating device (②).
2) Turn the upper cover (①) 90°(from left or right side), then put a film between upper and nether frame (⑦ and ⑩), switch the knob (⑧) to close the frames tightly.
3) Turn the upper cover back and push down the elevating wrench (⑨) to elevate the frame to working position (there is a position holder on the principal axes(③)).
4) Take the stainless steel sheet (⑥) off from the machine, place the product in the middle of the sheet, and then bury the part of the product which you do not need to take shape on. Place the sheet back onto the machine.
5) Switch on the heating device (press the “Heat” button (⑬) ) to heat the film.
6) Switch off the heating device about 2 - 3 minutes later, when the lower surface of the film is under the nether frame about 2 cm. (The film will sag after heating. The deeper depression, maintain will be more thin.)
7) Switch the elevating wrench to set down the frame and turn on the vacuum motor (press the “Model” button (⑫) ).
8) Switch off the vacuum motor after forming. Take the film out when it cools down, and then use scissors to cut the spare margins.

Advantage:

Energy-saving mute

Easy to use

Accurate model

Intelligent control

Web: www.zzlinker.com

Email: info@zzlinker.com

Mobile/WhatsApp/Wechat: 0086 13663715484

Zhengzhou Linker Medical Equipment Co., Ltd. is located in Zhengzhou, central area of China, a traditional commerce city with rich history and culture.

Since 2007, our company has been focusing on dental products export, including dental equipments and materials, dental cultural products and electrical products and so on. We believe that quality of products and service are the lifeline of enterprise. Our company has strict control on products quality, partners’ selection. All of our products are popular in Europe, America, Middle East, Asia Area more than 50 different countries and areas. While developing long and lasting cooperation with many big companies in these areas, we are seeking for more new partners from all over the world. If you need any dental products, don’t forget to give us enquiry, we will discuss further on our mutual beneficial cooperation.

Our main products are dental unit, air compressor, autoclave, X ray unit, ultrasonic scaler, light cure, air turbine handpiece, intra-oral camera and apex locator. Meanwhile we can supply branded products from Dentsply, Mani, Saeshin, Saeyang, NSK, Woodpecker, Vita, Meta, Coxo, Greatstar, BEING, SINOL, RUNYES, GAPADENT, SUPLINE, SMIC and so on.

“For your better clinic, for all better teeth, for most beautiful smile” is our goal of developing. Welcome to visit website or company to know more. Thanks very much.