Gas And Oil Dual Fuel Steam Boiler 0.7MW Hot Water Boiler Furnace Stainless Steel

0.7MW Gas and Oil Dual Fuel Industrial Heating Hot Water Boilers Hot water for enterprise

Hot Water Boilers system characters:

1. Boiler body: The combustion heating part of the vacuum phase change boiler body is made of high quality Q235 sheet and 20# steel tube. The advantage is that the large combustion chamber and the boiler furnace have a small heat load. The heating area is large, the volume is small, the structure is compact, and the water capacity is small, and the heating rate is fast. In addition, the negative pressure evaporation chamber integrated in the upper part has stable performance and reliable operation. Due to the large space of the negative pressure evaporation chamber, the inserted heat exchanger can be manufactured according to the needs of the user. Generally, the horizontal boilers adopt straight-tube heat exchangers, and the ends of the two ends can be disassembled for convenient maintenance and cleaning of the heat exchanger water pipes.

2. Manufacturing and construction of the heat exchanger: The heat exchanger is made of stainless steel and inserted into the negative pressure evaporation chamber in a tube bundle manner, and the ends are flanged. Its advantages: easy to disassemble, easy to replace, not easy to corrode, easy to maintain and clean, durable.

3.Automatic control: The control part selects the advanced controller to automatically detect the temperature of the boiler water and the temperature of the water outlet; it automatically detects the faults inside the burner and the furnace body; the combustion time can be controlled by the program setting; it can automatically change according to the load change automatically. Adjust the whole process of combustion, reduce the number of starts and stops caused by the change of load, make the boiler run normally, and reduce the loss of purge heat during start-stop.

4. Combustion equipment: Due to the special design of the vacuum phase change boiler, according to the fuel type and user requirements, various imported and domestic fuel oil and gas burners can be configured through special installation boards.

Commerical hot water boiler Features:
1. Adopting the normal pressure mode, the boiler is not under pressure, and the safety factor is high, and there is no danger of explosion.
2. Designed as a burner-type pyrotechnic tube boiler, the fuel is burned by the burner in a micro-positive pressure in the furnace, the high-temperature flue gas is radiated and heat-exchanged in the furnace, and then enters the convective heat exchange of the pyrotechnic tube, and finally passes through the upper cigarette case. discharge.
3. The boiler body design of the boiler body adopts computer optimized simulation design, which fully optimizes the size of the boiler and makes the shape harmonious and beautiful.
4. The flue pipe is inserted with a baffle to slow down the flue gas discharge speed, strengthen the heat exchange, ensure the heat generated by the fuel combustion to heat the boiler water to the greatest extent, and greatly improve the thermal efficiency of the boiler.
5, equipped with imported brand burners, fully automatic program control, high degree of automation, the fuel system provides the fuel needed for combustion, the air supply system sends the appropriate wind speed, air volume, the ignition system ignites the mixture of air and fuel, the detection system Ensure stable and safe combustion of the burner
6. The gap between the large diameter pipe and the large hole bridge makes the scale coating thin and easy to clean in the same time. Product map
7, the shell shell furnace large interlayer water jacket, the boiler water capacity is large, can provide sufficient boiling water.
8, with multiple safety protection: leakage protection means that leakage automatically cuts off the power supply; overheat protection means that when the boiler water temperature reaches the alarm temperature, the burner is automatically stopped and an alarm is issued; when the secondary overheat protection means that the temperature of the boiler casing exceeds 105 °C, it is automatically cut off. The secondary circuit, the boiler stops working; the water level detection protection uses the sophisticated water level electrode rod to monitor the water level in real time, and the water level is lower than the upper limit water level solenoid valve until the upper limit water level is reached.
9, mechatronics design, small size, easy to install and transport.
10. The furnace is specially treated to ensure the water quality is clean and hygienic.
11, the outer lining aluminum foil glass wool for insulation, better insulation effect.
12, white color plate packaging, beautiful, clean and rust resistant.
13. The water supply port is at the lower part, the solenoid valve automatically replenishes water, and the boiling water in the boiling water area takes water to eliminate the phenomenon of “hot and cold water” and “thousand boiling water” to ensure that 100% of the drinking water is pure boiling water. 14. The boiler can be used in two machines, which can supply boiling water and provide hot water.

Oil water boiler 0.35MW-14MW Oil Gas Fired hot water boiler technical datasheet

Oil water boiler Vocume hot water boiler

Yongxing Boiler Group Co., Ltd. is a group company specializing in research, development, manufacturing, sales and installation services for various boilers and various thermal energy machinery and equipment.

Yongxing Boiler occupies an area of 60,000m2, with fixed assets of 15 million dollars, and is used for more than 100 sets of large and medium-sized equipment for production. More than 60 sets of advanced equipment for product quality inspection, with 37 series. The boiler and pressure vessel contains 167 specifications and models.

With A-class boiler manufacturing license issued by the General Administration of Quality Supervision, Inspection and Quarantine

A1 and A2 pressure vessel manufacturing licenses

The first-class boiler installation and transformation license

The ISO9001 international quality system certification and so on.

Annual production capacity is over 2000 tons.

YONGXING boiler main product:

Coal fired steam boilers, oil/gas steam boiler,hot water boilers, Thermal oil heaters, hot air furnace, oil/gas burners,chain grate accessories, and other environmentally friendly boilers and pressure vessels .

All the equipment are strictly enforced by the state and Industry standard, reasonable product design, advanced production technology, technical content in the country's similar products in a leading position, with compact structure, low noise, high thermal efficiency, safe and reliable operation, high degree of automation, etc.

All environmental indicators are in line with the national class I regional environmental protection standards require excellent products recommended by the environmental protection department.

Our company holds A-class boiler manufacturing qualification, A1, A2 pressure vessel manufacturing qualification and mechanical and electrical equipment installation engineering professional contracting qualification, and passed the international ISO9001 2000 quality management system certification.

Our company strictly follows the ISO9001 international quality management system guarantee model, carries out quality management and quality inspection and control activities, and the product quality is stable. It was rated as “Contract-honoring and Promise-keeping Enterprise” by the Henan Provincial Administration of Industry and Commerce, “National Honest and Law-abiding Enterprise” by the Ministry of Agriculture, and was included in the member unit by the China Quality and Technical Supervision Association, and has obtained a number of patented technologies.

Company honor: