Pipe Stamping Processing NC Feeder Machine , Punch Press Feeder Equipment

NC feeder, pipe stamping processing, Ruihui punch feeding equipment

The NC feeder is the most convenient three-feeder type with the most convenient installation, the most convenient use, the simplest operation, the highest feeding accuracy, the most stable performance, the lowest failure rate and the simplest maintenance.

Reasons why the NC feeder is not feeding properly:

1. The external air supply pressure of the NC feeder is insufficient, which causes the clamping and loosening cylinders to not operate normally;

Ruihui NC feeder uses cylinder clamping and relaxation. If the pressure of the air source is insufficient, the cylinder will not operate normally, which will affect the normal feeding action. At this time, the three-point combination of the NC feeder can be checked to see the pressure gauge. Pressure, check the external air source to solve.

2. The pressing force of the material feeding spring of the NC feeder is not enough; the pressure of the feeding spring of the feeding machine is not adjusted well, which will cause the material to slide between the rollers, which will result in inaccurate feeding. At this time, the pressing force of the pressing spring is appropriately increased. Just fine.

3. The feeding or loosening time of the NC feeder is not correct; the stamping process of different molds is different, and the actual feeding time and relaxation time are different.

When many customers actually use Ruihui NC feeder, they often adjust the feeding height after changing the mold, but do not change the feeding and relaxation time, causing feeding and relaxing too early or too late, which causes the feeding to be inaccurate. When re-adjusting the feeding and relaxation time of the NC feeder.

4. The actual feeding speed of the NC feeder is too fast; the NC feeder is not a high-speed feeding device due to the limitation of the response time of the electric control system. The punching speed is generally more than 200 times, and the NC feeder can't keep up. Only other high-speed feeding devices can be replaced at this time.

5. There is oil or foreign matter in the feeding roller of the NC feeder. There is a material in the NC feeder drum that can cause the material to slip and the material cannot be clamped; if there is foreign matter in the drum, the gap will be inaccurate, and the drum can be cleaned at this time.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.