10mm Trimpot Trimmer Potentiometer PT10

10mm spain trimpot PT10, used in circuits for tuning and recalibration

Description:

A trimpot or trimmer potentiometer is a small potentiometer. When they are used as a variable resistance (wired as a rheostat) they are called preset resistors. Trimpots or presets are normally mounted on printed circuit boards and adjusted by using a screwdriver. The material they use as a resistive track is varying, but the most common is either carbon composition or cermet. Trimpots are designed for occasional adjustment and can often achieve a high resolution when using multi-turn setting screws.

Several different versions of trimpots are available, using different mounting methods (through hole, smd) and adjusting orientations (top, side) as well as single and multi-turn variations.

• Single turn

Single turn trimmers/presets are very common and used where a resolution of one turn is sufficient. They are the most cost effective variable resistors available.

• Multi turn

For higher adjustment resolutions, multi-turn trimpots are used. The amount of turns varies between roughly 5-25, but 5, 12 or 25 turns are quite common. They are often constructed using a worm-gear (rotary track) or leadscrew (linear track) mechanism to achieve the high resolution. Because of their more complex construction and manufacturing, they are more costly than single turn preset resistors. The lead screw packages can have a higher power rating because of their increased surface area.

Features:

• Carbon resistive element

• Dustproof enclosure

• Polyester substrate

• Also upon request:

* Wiper positioned at 50% or fully clockwise

* Supplied in magazines for automatic insertion

* Long life model for low cost control potentiometer application

* Self extinguishable plastic UL 94V-0

* Cut track option

* Special tapers

* Mechanical detents

* Low & extra low torque versions

* Special switch option

Application:

Used for adjustment, tuning and calibration in circuits.

Mechanical specifications

Others:

Rotation life: After 10,000 rotation, the changes impacted no more than ± (15% R +0.5 Ω ) rotational noise not more than 100 mv

Terminal strength: After welding (350 °C, 3,5 seconds) , the termination of terminal contacts should be good, no loosening of.

Soldering ability: Dip the terminals into tin tank at 260°C±5°C for 2±0.5 seconds, the soldering area should be more than 90%.

Resistance SR code table:

Mounting methods:

Rotors available:

ANYO is the leading supplier of electronic components. We were established in 2012, based in Ningbo (Close to ShangHai). Before establishment, we were lawful chief representative of EMDAS ELEKTRONIK in Turkey. We always get the qualified products with fast, easy ordering, short delivery time, and free technical help.

We have our own carbon potentiometer factory, which is professional and has the ability to develop different kinds of potentiometers. We have our own trade mark and letter of patent for the structure.

We value every customer visit, which is a platform to show our profession and friendly. Because our corporate philosophy is to be a friend with you, not just business.

We attend professional electronic components exhibitions, which is most important to know the market trend, and gain the ability to help our clients expand their market and serve them better.

ANYO always pursuit of quality, not quantity. To ensure the quality, we only cooperate with qualified suppliers. Besides, our QC staff will control all shipments before loading.